Bently Nevada 330103-00-12-10-01-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-12-10-01-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL series, configured with an M10 x 1 thread (Option 00 unthreaded length, 120 mm case length) and a 1.0-meter system length. This eddy-current transducer is designed for non-contact radial vibration and axial position measurements on critical rotating machinery, such as gas and steam turbines, compressors, and pumps. The probe is engineered for operation within the 3300 XL 8 mm transducer system, which includes a compatible 3300 XL Proximitor sensor and extension cable. This specific configuration features a miniature coaxial ClickLoc connector with a connector protector and standard (unarmored) cable. The absence of armor and the 1.0 m lead make this unit suitable for standard environmental installations where mechanical abrasion protection is not required.

Features

• M10 x 1 thread size with 120 mm case length (Option 12)
• 0 mm unthreaded length (Option 00)
• 1.0 meter total system length (Option 10)
• Miniature coaxial ClickLoc connector with protector, standard cable (Option 01)
• Agency Approval: Not required (Option 00)
• Component of the 3300 XL 8 mm Proximity Transducer System

Applications

• Shaft vibration and axial position monitoring
• Rotor position measurement
• Critical rotating machinery protection
• Fluid film bearing diagnostics
• High-speed industrial turbo-machinery

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330103-00-12-10-01-00	3300 XL 8 mm Probe, M10 x 1, without armor
A - Unthreaded Length	00	0 mm unthreaded length
B - Case Length	12	120 mm case length
C - Total Length	10	1.0 meter system length
D - Connector/Cable	01	ClickLoc connector with connector protector, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330103-00-12-10-01-00
Probe Diameter	8.0 mm
Thread Size	M10 x 1
Cable Type	Standard (unarmored) coaxial
Connector	Miniature coaxial ClickLoc with connector protector
System Length	1.0 m
Operating Temperature	-52 degC to +177 degC
Material	AISI 303 or 304 Stainless Steel
Agency Approvals	Not required

Installation Guidelines

• Ensure the probe tip is installed in a rigid, non-conductive mount if electrical isolation is required.
• Maintain the specified gap voltage requirements as defined in the 3300 XL monitoring system manual.
• Tighten ClickLoc connectors finger-tight; do not use pliers or tools to force the connection.
• Ensure the cable is routed away from high-voltage lines to prevent electromagnetic interference (EMI).
• For probes with M10 x 1 threads, do not exceed 15 mm of thread engagement to prevent binding.

Compliance and Certifications

• CE marked
• RoHS compliant