Bently Nevada 330103-00-12-10-02-05 3300 XL 8 mm Proximity Probe

Description

330103-00-12-10-02-05: 3300 XL 8 mm proximity probe configured with 0.0 in unthreaded length (Option 00), 1.2 in case length (Option 12), and 1.0 m total length (Option 10). This 8 mm probe utilizes a miniature ClickLoc connector (Option 02) and meets CSA, ATEX, and IECEx hazardous area requirements (Option 05).

This 3300 XL probe is a primary component of the 3300 XL 8 mm transducer system, used for non-contact eddy-current displacement measurement. It provides accurate gap-to-shaft distance data for vibration, axial position, and speed monitoring on critical rotating machinery such as turbines, compressors, and pumps. This configuration is specifically designed for environments requiring hazardous area approvals and standard ClickLoc connection interfaces.

Features

• Option 00: 0.0 in (0 mm) unthreaded length, fully threaded probe body
• Option 12: 1.2 in (30 mm) case length
• Option 10: 1.0 m (3.3 ft) total system length
• Option 02: Miniature ClickLoc coaxial connector, no connector protector
• Option 05: Agency approvals for CSA, ATEX, and IECEx hazardous areas
• Compatible with Bently Nevada 3300 XL 8 mm Proximitor sensors and 3300 XL extension cables

Applications

• Shaft vibration and axial position measurement on high-speed rotating equipment
• Critical machinery protection for power generation turbines and compressors
• Process monitoring in petrochemical, oil and gas, and water treatment industries
• Hazardous area machinery monitoring (Class I, Div 2 / Zone 2 environments)

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is mounted in a stable, vibration-dampened fixture to prevent false readings.
• Maintain proper clearance between the probe tip and the target to ensure the gap remains within the linear operating range.
• Use appropriate thread sealant if required to prevent oil or process fluid ingress along the threaded body.
• Route extension cables through dedicated conduit or cable trays to minimize electromagnetic interference (EMI).
• Verify all connections are hand-tightened for ClickLoc connectors to prevent signal discontinuity.

Compliance and Certifications

• CE marked for compliance with European directives
• CSA certified for Class I, Division 2, Groups A, B, C, and D
• ATEX/IECEx certified for Ex nA IIC T1...T5 Gc (Zone 2)