Bently Nevada 330103-00-25-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-25-05-02-00 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread, designed for non-contact eddy-current displacement measurement. This specific configuration includes 0 mm unthreaded length (Option 00), a 250 mm case length (Option 25), a 0.5 meter total system length (Option 05), and a standard Miniature ClickLoc connector (Option 02). It is an unarmored probe assembly intended for use in machinery protection monitoring, such as shaft vibration and axial position measurement, when integrated with a 3300 XL Proximitor sensor and extension cable.

This 3300 XL transducer system provides accurate, reliable position and vibration data for critical rotating machinery. The unarmored design (base model 330103) is standard for applications where the cable is protected by conduit or installed in environments not requiring heavy-duty mechanical armor. The 0.5 meter total length configuration is optimized for direct connection setups where shorter lead lengths are required for signal integrity.

Features

• M10 x 1 thread configuration (330103 base model) for metric installation requirements
• 0 mm unthreaded length (Option 00) for full-thread mounting flexibility
• 250 mm case length (Option 25) for specified depth insertion
• 0.5 meter total length (Option 05) standard for short-reach transducer chains
• Miniature ClickLoc coaxial connector (Option 02) for secure, tool-free connection
• Compatible with 3300 XL Proximitor sensors and extension cables for standard monitoring system integration

Applications

• Turbine, compressor, and pump shaft vibration monitoring
• Rotor axial position (thrust) measurement
• General purpose rotating machinery protection
• Radial vibration analysis on 8 mm probe monitoring chains

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed in a secure, rigid location to prevent false vibration readings. Use standard M10 x 1 mounting brackets (aluminum or phenolic for electrical isolation if needed). When tightening the probe, observe thread engagement limits to avoid binding. The Miniature ClickLoc connector should be finger-tightened; verify that the connection between the probe and extension cable is properly shielded and protected from moisture, typically by using a connector protector if the environment dictates.

Compliance and Certifications

Standard industrial compliance for Bently Nevada 3300 XL systems applies. This specific SKU (Option 00) does not carry hazardous area certifications; verify local requirements for intrinsically safe or non-incendive installations if the equipment is to be used in hazardous zones.