Bently Nevada 330103-01-07-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330103-01-07-05-02-00 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread (Option 01) and an unarmored construction. This probe is a critical component of the 3300 XL 8 mm proximity transducer system, designed for high-precision non-contact eddy-current displacement measurement, including shaft vibration and axial position monitoring in critical rotating machinery.

This specific configuration is defined by a 0.1 in unthreaded length (Option 01), a 0.7 in case length (Option 07), and a 0.5 meter total cable length (Option 05). It utilizes a miniature coaxial ClickLoc connector with a standard cable (Option 02) and is supplied without specific hazardous area agency approvals (Option 00). This probe is designed for seamless integration with 3300 XL Proximitor sensors and 3300 XL extension cables to ensure accurate system-wide performance in demanding industrial environments.

Features

• M10 x 1 thread probe body for metric installation requirements
• Unarmored construction for standard industrial mounting
• Miniature coaxial ClickLoc connector for reliable signal transmission
• Designed for 0.5 meter total system length (probe plus cable)
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Axial rotor position measurement
• Critical rotating machinery protection
• Fluid film bearing diagnostics
• High-temperature machinery environments (within specified temperature limits)

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the 3300 XL system manual for optimal linear range. When routing, secure the cable to prevent mechanical vibration and protect the ClickLoc connector from excessive moisture or contamination. For hazardous area installations, ensure the Proximitor sensor is mounted in a suitable enclosure and that all cabling adheres to relevant site safety drawings.