Manufacturer: Bently Nevada
Product No.: 330103-01-08-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 01 (0.0 in unthreaded), Option 08 (0.8 in case length), and Option 10 (1.0 m length) specify this 330103-01-08-10-02-00 3300 XL 8 mm reverse mount proximity probe configuration. This non-contact eddy-current displacement transducer measures shaft vibration and axial position in critical rotating machinery, designed specifically for use within 3300 XL proximity transducer system monitoring chains.
As a reverse mount probe, this unit allows for installation where the probe body is mounted inside the machine case. It utilizes the standard 3300 XL 8 mm system architecture and must be paired with compatible 3300 XL extension cables and 3300 XL Proximitor sensors to maintain system accuracy and calibration integrity. The 1.0 m cable length (Option 10) and standard Miniature ClickLoc connector (Option 02) ensure compatibility with standard field cabling practices.
| Option | Code | Description |
|---|---|---|
| Orderable Part Number | 330103-01-08-10-02-00 | 3300 XL 8 mm Proximity Probe |
| A - Unthreaded Length | 01 | 0.0 in |
| B - Case Length | 08 | 0.8 in |
| C - Total Length | 10 | 1.0 m |
| D - Connector/Cable | 02 | Miniature ClickLoc, standard cable |
| E - Agency Approval | 00 | Not required |
| Manufacturer | Bently Nevada |
| Part Number | 330103-01-08-10-02-00 |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Mounting Type | Reverse Mount |
| Linear Range | 2.0 mm (80 mil) |
| Operating Temperature | -51 degC to +177 degC |
| Case Material | AISI 303 or 304 Stainless Steel |
| Connector Type | Miniature ClickLoc |
| Output Impedance | 50 ohms (nominal) |
Ensure correct probe gap settings per machine requirements to prevent mechanical interference. Maintain proper cable routing away from high-voltage AC lines to prevent signal interference. Verify that the matching 3300 XL Proximitor sensor is calibrated for this specific probe length and cable configuration. Tighten connector components to specified torque values using the provided ClickLoc mechanism.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
