Manufacturer: Bently Nevada
Product No.: 330103-07-18-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The 330103-07-18-10-02-00 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread and an unarmored construction. This specific configuration includes a 70 mm unthreaded length (Option 07) and a 180 mm case length (Option 18), paired with a 1.0 meter total system length (Option 10). The probe is terminated with a miniature coaxial ClickLoc connector and standard cable (Option 02) and is supplied without specific hazardous area agency approvals (Option 00).
As part of the Bently Nevada 3300 XL 8 mm transducer system, this probe is designed for use in critical rotating machinery environments to perform non-contact, eddy-current displacement measurements. It is fully compatible with the 3300 XL Proximitor sensor and 3300 XL extension cables, forming a complete measurement chain for monitoring shaft vibration and axial position on turbines, compressors, and pumps.
| Option | Code | Description |
|---|---|---|
| Orderable Part Number | 330103-07-18-10-02-00 | 3300 XL 8 mm Proximity Probe, M10 x 1, Unarmored |
| A - Unthreaded Length | 07 | 70 mm |
| B - Case Length | 18 | 180 mm |
| C - Total Length | 10 | 1.0 meter |
| D - Connector/Cable | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | Not required |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330103-07-18-10-02-00 |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm (0.31 in) |
| Thread Size | M10 x 1 |
| Armor | None (Unarmored) |
| Case Length | 180 mm |
| Unthreaded Length | 70 mm |
| Total Length | 1.0 m |
| Connector Type | Miniature coaxial ClickLoc |
| Agency Approvals | Not required |
Ensure that the probe gap is set according to the 3300 XL system manual to achieve linear output voltage. When installing, avoid overtightening the probe in the M10 x 1 mounting location. Ensure the cable is properly secured to minimize vibration and protected from physical damage. The probe should be installed in a manner that prevents the connector from being subjected to excessive mechanical stress.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
