Bently Nevada 330103-08-13-10-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-08-13-10-02-05 is a metric 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 thread (Option 08 unthreaded length, Option 13 case length), 1.0 m total system length (Option 10), standard ClickLoc connector without connector protector (Option 02), and CSA/ATEX/IECEx hazardous area approvals (Option 05). This non-contact eddy-current transducer is a core component of the 3300 XL 8 mm proximity transducer system, used for precise shaft vibration and axial position measurement in critical rotating machinery. This 8 mm probe operates within a complete monitoring chain, which typically includes a 3300 XL Proximitor sensor and a 3300 XL extension cable. The system provides an accurate voltage output proportional to the gap between the probe tip and the observed conductive surface, essential for monitoring parameters such as rotor position, vibration displacement, and speed on turbines, compressors, and large motors.

Features

• M10 x 1 thread size for standard metric mounting applications
• 1.0 meter total system length (probe plus extension cable)
• Miniature coaxial ClickLoc connector (Option 02) for secure, reliable connection
• CSA, ATEX, and IECEx hazardous area certifications (Option 05)
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables
• Non-contact measurement principle ensures minimal wear and long service life in harsh industrial environments

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position (thrust) measurement
• Critical rotating machinery protection
• Fluid film bearing diagnostics
• High-speed rotating equipment in petrochemical and power generation facilities

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330103-08-13-10-02-05	3300 XL 8 mm Proximity Probe, M10 x 1
A - Unthreaded Length	08	0.8 in (Metric configuration)
B - Case Length	13	1.3 in (Metric configuration)
C - Total Length	10	1.0 m total system length
D - Connector/Cable	02	Miniature ClickLoc connector, standard cable
E - Agency Approval	05	CSA, ATEX, IECEx Approvals

Technical Specifications

Manufacturer	Bently Nevada
Part Number	330103-08-13-10-02-05
Probe Diameter	8 mm
Thread Size	M10 x 1
Total System Length	1.0 m
Connector Type	Miniature ClickLoc coaxial
Approval Agency	CSA, ATEX, IECEx
Temperature Range	-55 degC to +177 degC (T2 classification)

Installation Guidelines

• Ensure the probe is gapped correctly according to the 3300 XL system manual to maintain the linear range.
• Use the provided connector protector (if applicable) or self-fusing silicone tape to prevent environmental ingress at the connection point.
• Verify that the total system length (probe + extension cable) matches the calibrated length of the Proximitor sensor (e.g., 5.0 m or 9.0 m systems).
• Install in accordance with Bently Nevada drawings 141092 (ia) or 140979 (nA, ec) for hazardous area compliance.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmosphère Explosible)
• IECEx (International Electrotechnical Commission Explosive)