Bently Nevada 330103-19-25-10-01-00 3300 XL 8 mm Proximity Probe

Description

The 330103-19-25-10-01-00 is an 8 mm 3300 XL proximity probe configured with an M10 x 1 thread, 1.9 in unthreaded length (Option 19), and 2.5 in case length (Option 25). This component is a core part of the 3300 XL 8 mm Proximity Transducer System, utilized for non-contact eddy-current displacement measurement in critical rotating machinery. This specific configuration features a 1.0 m total system length (Option 10) and includes a miniature coaxial ClickLoc connector with a connector protector (Option 01).

The 3300 XL system is engineered for reliable monitoring of shaft vibration and axial position. The probe is designed to function seamlessly with the 3300 XL Proximitor sensor and extension cable, maintaining signal integrity across the specified total system length. This unarmored probe configuration is suitable for installations where mechanical abrasion protection is not required, providing precise gap measurements for machinery protection applications.

Features

• M10 x 1 thread probe body (330103 series)
• Option 19: 1.9 in unthreaded probe length
• Option 25: 2.5 in overall case length
• Option 10: 1.0 m total system length
• Option 01: Miniature coaxial ClickLoc connector with connector protector, standard cable
• Option 00: No hazardous area agency approvals
• Compatible with standard 3300 XL 8 mm transducer monitoring chains
• Designed for 8 mm probe tip diameter and linear range

Applications

• Turbine shaft vibration monitoring
• Compressor rotor axial position measurement
• Critical rotating machinery protection
• General purpose industrial vibration analysis
• Balance and alignment monitoring on high-speed rotating equipment

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed using the appropriate threaded mounting bracket to maintain electrical isolation if required. The probe gap must be set according to the monitoring system specifications using the provided gauge. Route the coaxial cable away from high-power cabling to prevent electromagnetic interference. Ensure all connectors are clean and fully seated; use the connector protector to prevent mechanical damage and ingress during installation.

Compliance and Certifications

This product configuration (Option 00) does not include hazardous area approvals. For installations requiring North American or international hazardous area ratings (CSA, ATEX, IECEx), select an orderable code with Option 05.