Bently Nevada 330104-00-05-50-02-05 3300 XL 8 mm Proximity Probe

Description

The 330104-00-05-50-02-05 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread with integrated armor for enhanced mechanical protection. This configuration includes 0 mm of unthreaded length (Option 00), a 50 mm case length (Option 05), and a 5.0 meter total system length (Option 50). It utilizes a miniature ClickLoc connector with standard cable (Option 02) and is rated for hazardous area environments with CSA, ATEX, and IECEx certifications (Option 05).

This eddy-current transducer is designed for non-contact displacement measurement in critical rotating machinery, such as turbines and compressors. The probe provides precise shaft vibration and axial position data when paired with the compatible 3300 XL 5.0 meter Proximitor sensor and extension cable. The M10 x 1 metric thread facilitates installation in machinery requiring standard metric mounting interfaces, while the armored cable ensures durability in abrasive or harsh industrial environments.

Features

• M10 x 1 probe thread with integrated armor for mechanical protection
• 5.0 meter total system length configuration
• Miniature ClickLoc coaxial connector
• Standard cable type
• Certified for hazardous locations (CSA, ATEX, IECEx)
• 0 mm unthreaded length; 50 mm case length
• Compatible with 3300 XL 8 mm transducer system monitoring chains

Applications

• Radial vibration and axial position measurement
• Steam and gas turbine machinery monitoring
• Centrifugal and reciprocating compressor vibration analysis
• Hazardous area machinery protection (classified zones)
• Critical rotating equipment requiring armored cable protection

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is gapped according to the 3300 XL manual to maintain linear range.
• Use appropriate mounting brackets for M10 x 1 threads; do not exceed torque limits during installation.
• Keep extension cable routing separate from high-voltage AC lines to prevent signal interference.
• Connector protectors are recommended for all field connections to provide environmental sealing.
• Install the Proximitor sensor in a dry, protected environment according to the hazardous area drawings if applicable.

Compliance and Certifications

• CSA: Class I, Division 2, Groups A, B, C, D
• ATEX: Ex ia IIC T5...T1 Ga
• IECEx: Ex ia IIC T5...T1 Ga