Bently Nevada 330104-00-05-90-02-05 3300 XL 8 mm Proximity Probe

Description

The 330104-00-05-90-02-05 is a high-reliability 3300 XL 8 mm proximity probe featuring an M10 x 1 thread, an armored cable construction, and a total probe system length of 9.0 meters. This transducer is a core element of the Bently Nevada 3300 XL monitoring chain, designed for non-contact measurement of shaft vibration and axial position on critical rotating machinery such as turbines, compressors, and large pumps.

This specific configuration utilizes a 0.0 in unthreaded length (Option 00) and a 0.5 in case length (Option 05) to accommodate specific mounting requirements. The inclusion of Option 90 (9.0 m total length) necessitates use with a corresponding 9.0 m Proximitor sensor for system calibration. The armored cable (Option 90) provides mechanical protection in demanding industrial environments, while the CSA/ATEX/IECEx approval (Option 05) ensures compliance for installation in hazardous area locations.

Features

• M10 x 1 probe thread with integrated armor for enhanced mechanical durability.
• 9.0 meter total system length optimized for 3300 XL Proximitor sensor matching.
• Miniature ClickLoc coaxial connector (Option 02) for secure, reliable signal transmission.
• CSA, ATEX, and IECEx hazardous area certifications (Option 05).
• Designed for seamless integration with 3300 XL monitoring systems for precise displacement measurements.

Applications

• Turbine and compressor rotor vibration monitoring.
• Axial (thrust) position measurement.
• Bearing wear and clearance monitoring in rotating machinery.
• Harsh industrial environments requiring armored cabling for cable protection.

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is gapped according to the 3300 XL system manual for the target machinery.
• Use appropriate mounting brackets (e.g., M10 x 1 threaded brackets) to secure the probe.
• Route cables away from high-voltage lines to minimize electromagnetic interference.
• Protect connectors using provided or optional connector protectors (e.g., 40180-02) if exposure to moisture or contaminants is likely.
• For hazardous area installations, adhere strictly to the entity parameters and control drawings referenced in the datasheet.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission Explosive)