Bently Nevada 330104-00-12-10-02-CN 3300 XL 8 mm Proximity Probe

Description

Engineered for critical machinery protection, the 330104-00-12-10-02-CN is an armored proximity probe belonging to the industry-standard Bently Nevada 3300 XL 8 mm series. This transducer system utilizes eddy current technology to provide highly accurate static (position) and dynamic (vibration) measurements on rotating shaft machinery. By generating a continuous radio frequency field, the probe measures the physical gap between the probe tip and a conductive target, such as a turbine shaft.

This specific configuration features an M10 x 1 metric thread with stainless steel armor for robust mechanical protection in demanding industrial environments. Equipped with a miniature coaxial ClickLoc connector, it ensures secure coupling and signal integrity with the corresponding extension cable and Proximitor sensor.

Features

• Integral stainless steel armor provides exceptional resistance to abrasion, crushing, and physical damage in harsh operating environments.
• Features the miniature coaxial ClickLoc connector to resist loose connections and maintain high-fidelity signal transmission.
• Compatible with standard 3300 XL 8 mm Proximitor Sensors and extension cables.
• Fully compliant with hazardous area requirements under European, international, and Chinese regulatory bodies.

Applications

• Turbine shaft vibration and axial position monitoring in power generation facilities.
• Radial fluid-film bearing shaft displacement measurements in high-speed compressors.
• Critical rotating asset protection across oil and gas, petrochemical, and water treatment industries.

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Probe Clearance: Ensure adequate side clearance around the probe tip to prevent cross-talk and side-loading errors caused by adjacent metal objects.
• Cable Routing: Secure the armored cable using appropriate clamps to prevent mechanical fatigue and whipping in high-vibration areas.
• Grounding: Ensure the coaxial shield is isolated from the machine ground at the probe side, maintaining a single-point ground connection at the Proximitor sensor terminal block.
• Torque Limits: Do not exceed the maximum installation torque specification for the M10 x 1 threaded body to avoid damaging the sensor assembly.

Compliance and Certifications

• ATEX: Intrinsically Safe and Non-Sparking certificates for Zone 0, 1, and 2 installations.
• IECEx: Certified for use in explosive gas atmospheres.
• NEPSI: Certified for explosion protection in hazardous environments within the People's Republic of China.