Bently Nevada 330104-00-13-15-01-00 3300 XL 8 mm Proximity Probe

Description

330104-00-13-15-01-00: 3300 XL 8 mm proximity probe, 1/4-28 UNF thread, 0.0 in unthreaded length (Option 00), 1.3 in case length (Option 13), and 1.5 m total length (Option 15). This sensor serves as a primary component in the 3300 XL proximity transducer system, providing non-contact eddy-current displacement measurement for shaft vibration and axial position monitoring applications.

This specific configuration features a standard miniature ClickLoc connector (Option 01) without armor and does not include hazardous area agency approvals (Option 00). It is designed to interface with 3300 XL Proximitor sensors and extension cables, ensuring high-accuracy signal transmission in rotating machinery environments such as turbines, compressors, and pump sets.

Features

• 8 mm probe tip diameter
• 1/4-28 UNF-2A thread configuration
• 1.5 m total system length
• Standard miniature ClickLoc connector
• Operating temperature range from -51 degC to +177 degC
• Polyphenylene sulfide (PPS) probe tip material

Applications

• Radial vibration and shaft position measurement on centrifugal compressors
• Axial position (thrust) monitoring on steam and gas turbines
• Critical rotating machinery protection
• Fluid film bearing health monitoring
• High-speed gearbox vibration analysis

Ordering Information

Technical Specifications

Installation Guidelines

Install the probe using the provided mounting threads to ensure proper clearance and gap distance from the target surface. Avoid overtightening the probe tip against the shaft during installation. Ensure the extension cable is routed away from high-voltage AC lines to prevent signal interference. Use proper grounding techniques for the 3300 XL monitoring system to maintain signal integrity.