Bently Nevada 330104-00-16-10-02-05 3300 XL 8 mm Proximity Probe

Description

Fully threaded M10 x 1 metric steel probe body with stainless steel armor (Option 00, 0 mm unthreaded) and a 160 mm case length (Option 16) specifies the Bently Nevada 330104-00-16-10-02-05 3300 XL 8 mm proximity probe.

This specific metric-threaded probe is equipped with Option 02, signifying a miniature coaxial ClickLoc connector and standard cable, shielded by stainless steel armor. Unlike non-armored configurations (such as model 330103) or variants without hazardous area approvals, this probe incorporates Option 05 for CSA, ATEX, and IECEx certifications. The total system length of the cable is 1.0 meter (Option 10), which pairs with a 3300 XL Proximitor sensor and extension cable to form a complete machinery position monitoring loop.

Features

• Option 00 specifies a 0 mm unthreaded length on an M10 x 1 metric threaded body.
• Option 16 provides a 160 mm overall case length.
• Option 10 indicates a 1.0-meter (3.3 feet) total cable length.
• Option 02 provides a miniature coaxial ClickLoc connector on standard cable.
• Option 05 provides CSA, ATEX, and IECEx hazardous area approvals.
• Integrated stainless steel armor protects the coaxial cable from physical damage, abrasion, and harsh operating conditions.
• Backwards compatible with non-XL 3300 series 5 mm and 8 mm components.

Applications

• Shaft vibration and axial position monitoring in rotating machinery.
• Radial vibration, axial thrust, and speed measurements on fluid-film bearing machines.
• Heavy-industry environments including steam turbines, gas turbines, compressors, pumps, and generators.
• Installation in hazardous areas requiring certified explosion-proof or intrinsically safe instrumentation.

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure correct thread engagement; maximum thread engagement length for M10 x 1 threads is 15 mm.
• Recommended torque for M10 x 1 probe case is up to 10 N-m (90 in-lb). Do not exceed torque limits to avoid casing damage.
• Finger-tighten the miniature coaxial ClickLoc connector.
• Maintain appropriate probe gap, typically -9 Vdc [approx. 1.27 mm (50 mils)] for radial vibration monitoring.
• Avoid bending the stainless steel armor beyond its minimum bend radius to prevent internal coaxial cable damage.

Compliance and Certifications

• CSA: Class I, Div 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III
• ATEX/IECEx: Zone 0/1/2, Ex ia IIC T4/T5 Ga, Ex nA IIC T4/T5 Gc
• CE Compliant