Bently Nevada 330104-00-18-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330104-00-18-10-02-00 is an 8 mm M10 x 1 threaded 3300 XL proximity probe featuring an armored cable for enhanced mechanical protection in industrial environments. This probe is a core component of the 3300 XL 8 mm Transducer System, designed to provide accurate, non-contact displacement measurements for shaft vibration and axial position monitoring in critical rotating machinery such as turbines, compressors, and pumps.

This specific configuration (Option 00 unthreaded length, Option 18 case length, Option 10 1.0 m total length, Option 02 miniature ClickLoc connector, Option 00 no agency approval) provides a robust sensing solution for machinery where space and harsh operating conditions require durable, armored cabling. It is fully compatible with 3300 XL Proximitor sensors and extension cables, ensuring precise signal transmission for machinery protection systems.

Features

• Armored Cable Construction: Provides superior physical protection against abrasion and mechanical damage compared to standard cabling.
• M10 x 1 Threaded Design: Ensures secure mounting and precise gapping in standard metric bearing housings.
• 3300 XL System Compatibility: Fully integrated with 3300 XL Proximitor sensors and extension cables for standard 5 m or 9 m system configurations.
• Miniature ClickLoc Connector: Facilitates reliable, locking coaxial connections while maintaining compact dimensions for installation in confined spaces.
• Non-Contact Measurement: Eliminates wear and ensures long-term stability for continuous vibration and position monitoring.

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical machinery protection systems
• High-abrasion environments requiring cable protection
• General-purpose rotating machinery diagnostics

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe is installed with the specified gap to the target surface, typically 1.27 mm (50 mils), to ensure linear range. Use Bently Nevada recommended mounting brackets to prevent mechanical stress. The armored cable should be routed with adequate bend radii to prevent fatigue and protected from excessive heat or chemical exposure. Verify that the total system length (probe + extension cable) matches the calibrated length required by the Proximitor sensor.