Bently Nevada 330104-00-20-10-02-00 3300 XL 8 mm Proximity Probe

Description

330104-00-20-10-02-00: 3300 XL 8 mm proximity probe featuring an M10 x 1 thread with armor (Option 20), 0 mm unthreaded length (Option 00), and 1.0 m system length (Option 10). This transducer configuration utilizes a standard miniature coaxial ClickLoc connector (Option 02) and requires no specific agency approval (Option 00).

The 330104 model is an M10 x 1 threaded proximity probe designed for applications requiring mechanical protection via an integral armor sleeve. It functions as part of the 3300 XL 8 mm transducer system, providing precise non-contact displacement measurements for critical rotating machinery, such as gas and steam turbines, compressors, and motors. The probe must be used with a compatible 3300 XL Proximitor sensor and extension cable to ensure accurate signal transmission for shaft vibration and axial position monitoring.

Features

• M10 x 1 probe thread (Option 20 case configuration)
• Integral armor for enhanced mechanical durability in harsh environments
• Miniature coaxial ClickLoc connector (Option 02) providing reliable electrical connectivity
• 1.0 m system length (Option 10) matched for specific Proximitor sensor impedance requirements
• Non-contact eddy-current measurement technology for shaft position and vibration

Applications

Used for continuous monitoring of shaft vibration, axial (thrust) position, and speed on rotating machinery in industries such as oil and gas, power generation, and petrochemical processing. This armored probe configuration is suitable for installations where increased mechanical protection against debris or abrasion is required.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the machinery monitoring requirements. Use appropriate thread-locking or mounting hardware to secure the M10 x 1 probe body. The ClickLoc connector should be protected from environmental contaminants using connector protectors if necessary. Grounding and shielding practices must be followed per the 3300 XL system documentation to prevent electromagnetic interference.