Bently Nevada 330104-00-25-10-12-00 3300 XL 8 mm Proximity Probe

Description

The 330104-00-25-10-12-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL series, featuring an M10 x 1 threaded case with an armored cable construction. This transducer is engineered for non-contact displacement measurement, specifically for monitoring rotor shaft vibration and axial position in critical rotating machinery. The system is designed to provide high-reliability data in demanding industrial environments when paired with compatible 3300 XL Proximitor sensors and extension cables.

This configuration utilizes a 1.0 meter total length (Option 10) and features FluidLoc cable (Option 12), which provides superior protection against liquid ingress along the cable path. The probe includes no unthreaded portion (Option 00) and a 250 mm case length (Option 25). This non-hazardous area rated unit (Option 00) is part of the robust 3300 XL monitoring chain, offering electrical and physical interchangeability with other 3300 XL components.

Features

• M10 x 1 thread, armored stainless steel case for mechanical protection
• FluidLoc cable construction for enhanced resistance to oil and other fluids
• 1.0 meter total system length
• Miniature coaxial ClickLoc connector for secure, reliable signal transmission
• Designed for seamless integration with 3300 XL Proximitor sensors

Applications

• Shaft vibration and axial position monitoring in turbines, compressors, and pumps
• Critical machinery protection in power generation, oil and gas, and petrochemical facilities
• Continuous condition monitoring in environments requiring fluid-tight cable protection
• General-purpose rotating equipment monitoring where 8 mm probe sizing is standard

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the specific machinery requirements to maintain the linear range of the transducer. When installing, tighten the probe case using the recommended torque to prevent loosening during operation. Protect the ClickLoc connector from moisture and contaminants; ensure the mating extension cable connector is clean and finger-tightened only. Use appropriate mounting brackets if electrical isolation from the machine housing is required.