Manufacturer: Bently Nevada
Product No.: 330104-01-08-15-02-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330104-01-08-15-02-05: 3300 XL 8 mm proximity probe, M10 x 1 threaded body, with stainless steel armor, 1.5 m total length, standard ClickLoc connector, and CSA/ATEX/IECEx hazardous area approvals. This sensor serves as a critical component in the 3300 XL 8 mm proximity transducer system, providing non-contact displacement measurements for shaft vibration and axial position monitoring in industrial rotating machinery.
The 330104 configuration utilizes an armored cable for enhanced mechanical protection in harsh environments. As an 8 mm probe system, it is designed for integration with the 3300 XL Proximitor sensor and extension cables to complete the signal chain. This specific variant includes a 1.5-meter total length (Option 15) and carries full hazardous area certifications (Option 05), supporting safe operation in volatile industrial process conditions.
| Option | Code | Description |
|---|---|---|
| Orderable Part Number | 330104-01-08-15-02-05 | 3300 XL 8 mm Proximity Probe, M10 x 1 |
| A - Unthreaded Length | 01 | Per factory specifications |
| B - Case Length | 08 | Per factory specifications |
| C - Total Length | 15 | 1.5 meter |
| D - Connector/Cable | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx Approvals |
| Manufacturer | Bently Nevada |
| Part Number | 330104-01-08-15-02-05 |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Thread Size | M10 x 1 |
| Total System Length | 1.5 m |
| Armor | Yes (Stainless Steel) |
| Cable Type | Standard (FEP jacket) |
| Connector Type | Miniature coaxial ClickLoc |
| Agency Approvals | CSA, ATEX, IECEx |
Ensure correct probe gap settings as defined in the 3300 XL system manual. When installing in hazardous areas, verify that the installation complies with Bently Nevada hazardous area drawing guidelines (e.g., drawing 141092 for ia/intrinsic safety). Use caution when routing the armored cable to prevent sharp bends or excessive stress on the connector-to-cable interface.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A PLC and a microcontroller can both generate step-and-direction motion, but arc welding exposes major differences in EMC, I/O protection, diagnostics, maintainability, safety integration, and...
Piezo pneumatic valves offer low holding power and fine proportional control, but they are not universal solenoid replacements. This guide covers driver electronics, flow limits, contamination, fail...
Built-in sensor timers can reject chatter, stretch short pulses, and simplify local timing—but they do not replace PLC diagnostics or safety logic. Learn how to apply on-delay, off-delay, and...
Reversing a three-phase motor is more than swapping two leads. This guide covers phase sequence, VFD settings, reversing contactors, encoder feedback, load checks, lockout, and commissioning tests.
Grounding one side of a 24 VDC supply can improve fault detection and voltage reference, while floating circuits support isolation. This guide explains bonding, noise, first-fault behavior, and...
Seal-in circuits and OTL/OTU instructions can hold the same command, but they fail differently. This guide compares scan behavior, restart risk, troubleshooting, permissives, and safer PLC design...
