Bently Nevada 330104-02-09-05-01-00 3300 XL 8 mm Proximity Probe

Description

330104-02-09-05-01-00 is an 8 mm smooth-body proximity probe belonging to the 3300 XL transducer system family. This specific configuration features a 20 mm unthreaded length (Option 02) and a 90 mm case length (Option 09), designed for integration into machinery protection monitoring chains. The probe measures 0.5 m in total length (Option 05) and utilizes a standard miniature ClickLoc connector (Option 01) without agency approvals (Option 00). The 3300 XL 8 mm probe operates as a non-contact eddy-current displacement sensor used for continuous monitoring of shaft vibration and axial position on rotating machinery. It is fully compatible with 3300 XL Proximitor sensors and 3300 XL extension cables. When installed, it provides a linear voltage output proportional to the gap between the probe tip and the observed conductive surface, facilitating critical diagnostic data for turbine and compressor health management.

Features

• Smooth (unthreaded) probe body construction for specific mounting requirements
• Standard miniature ClickLoc connector (Option 01) ensures a secure electrical connection with 3300 XL extension cables
• Total system length of 0.5 m (Option 05) optimized for short-run integration
• Compatible with all 3300 XL 8 mm Proximitor sensors and standard extension cables
• Non-contact sensing technology eliminates mechanical wear during operation

Applications

• Steam and gas turbine shaft vibration monitoring
• Centrifugal compressor axial position measurement
• Critical rotating machinery protection in oil and gas facilities
• Power generation equipment diagnostics
• High-speed gearbox vibration analysis

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330104-02-09-05-01-00	3300 XL 8 mm Proximity Probe, Smooth
A - Unthreaded Length	02	20 mm
B - Case Length	09	90 mm
C - Total Length	05	0.5 m
D - Connector/Cable	01	Miniature ClickLoc connector, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada
Part Number	330104-02-09-05-01-00
Probe Diameter	8 mm
Probe Body Type	Smooth (Unthreaded)
System Compatibility	3300 XL 8 mm Proximitor Sensors
Linear Range	2 mm (80 mils)
Operating Temperature	-51 degC to +177 degC
Storage Temperature	-51 degC to +177 degC
Case Material	AISI 303 or 304 stainless steel

Installation Guidelines

Ensure the probe is installed in a rigid mounting bracket to prevent mechanical resonance. Maintain the specified air gap between the probe tip and the target surface as defined in the system documentation. Use approved cable routing practices to protect against electromagnetic interference and physical abrasion. Always verify that the extension cable connectors are firmly locked and protected from contaminants before system startup.