Bently Nevada 330104-02-25-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330104-02-25-10-02-00 is an 8 mm proximity transducer probe from the Bently Nevada 3300 XL system, featuring an M10 x 1 thread and protective armor. This configuration is specifically defined by a 20 mm unthreaded length (Option 02), a 250 mm case length (Option 25), and a 1.0 meter total system length (Option 10). It utilizes a Miniature ClickLoc connector (Option 02) for standard cable connections and does not include agency approval certification (Option 00).

Used primarily for non-contact eddy-current displacement measurement, this probe is compatible with 3300 XL Proximitor sensors and 3300 XL extension cables. The inclusion of protective armor makes this unit suitable for environments where cable mechanical protection is necessary to prevent abrasion or damage. The M10 x 1 threaded body allows for secure mounting in metric-threaded probe housings, common in industrial rotating machinery such as turbines, compressors, and pumps for monitoring shaft vibration and axial position.

Features

• M10 x 1 thread configuration with protective armor
• 20 mm unthreaded probe body length
• 250 mm overall case length
• 1.0 m total system length
• Miniature ClickLoc coaxial connector
• Standard cable type
• No hazardous area agency approval required

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• Industrial environments requiring armored cable protection

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the 3300 XL system manual using the included mounting hardware. When routing the armored cable, avoid sharp bends that may compromise the integrity of the armor or the internal coaxial signal path. Ensure the Miniature ClickLoc connector is fully seated and tightened. Proper grounding of the system at the Proximitor sensor end is required to maintain signal integrity.