Bently Nevada 330104-06-14-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330104-06-14-05-02-05 is a 3300 XL 8 mm proximity probe configuration featuring an M10x1 thread, armored cable construction, and agency approvals for hazardous locations. This unit is designed for high-reliability, non-contact measurement of shaft vibration and axial position in critical rotating machinery. The probe utilizes an 8 mm tip diameter, providing a robust, encapsulated coil design that is standard for 3300 XL monitoring systems.

This specific variant is defined by its 60 mm unthreaded length (Option 06) and 140 mm case length (Option 14). It includes a 0.5 meter total system length (Option 05) and is equipped with a miniature coaxial ClickLoc connector on a standard cable (Option 02). With Option 05 specified, the probe meets CSA, ATEX, and IECEx hazardous area requirements, suitable for use in demanding industrial environments such as power generation, oil, and gas facilities.

Features

• M10x1 thread metric probe body with integrated armor for mechanical protection.
• Option 06: 60 mm unthreaded length.
• Option 14: 140 mm overall case length.
• Option 05: 0.5 meter total length configuration.
• Option 02: Miniature coaxial ClickLoc connector, standard cable.
• Option 05: Agency approval package including CSA, ATEX, and IECEx certifications.
• Compatible with 3300 XL Proximitor sensors and extension cables in standard machinery protection chains.

Applications

• Turbine and compressor shaft vibration monitoring.
• Rotor axial position measurement.
• Critical rotating machinery protection where hazardous area compliance is required.
• Industrial environments requiring armored probe protection.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the system manual for the specific machinery application. Use the provided ClickLoc connector for secure attachment to the extension cable; ensure the connection is protected in environments where oil exposure is possible. For hazardous area installations, adhere to local codes and the relevant hazardous area certification documentation.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission Explosive)