Bently Nevada 330104-10-23-10-01-00 3300 XL 8 mm Proximity Probe

Description

The 330104-10-23-10-01-00 is an 8 mm proximity probe from the 3300 XL series, featuring an M10 x 1 thread, armored construction, and a 1.0 m total length. This transducer is designed for non-contact eddy-current displacement measurement within 3300 XL monitoring chains, providing precise shaft vibration and axial position data for critical rotating machinery. This configuration includes a 100 mm unthreaded length (Option 10), a 230 mm case length (Option 23), and is supplied with a miniature coaxial ClickLoc connector and standard cable (Option 01).

The armored design of this probe provides additional physical protection for the cable in industrial environments, ensuring integrity during operation in demanding machinery setups. It is fully compatible with 3300 XL Proximitor sensors and extension cables, allowing for reliable signal transmission in applications such as turbines, compressors, and pumps. This unit is designated for installations where no specific hazardous area agency approval is required (Option 00).

Features

• M10 x 1 thread with armored probe body for environmental protection
• Option 10: 100 mm unthreaded length
• Option 23: 230 mm overall case length
• Option 10: 1.0 meter total system length
• Option 01: Miniature coaxial ClickLoc connector with connector protector, standard cable
• Option 00: No hazardous area agency approvals required
• Compatible with Bently Nevada 3300 XL Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Axial rotor position measurement
• Critical rotating machinery protection
• General-purpose displacement and gap measurement

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe is mounted using appropriate hardware, such as the Bently Nevada M10 x 1 threaded mounting bracket. Maintain a proper gap between the probe tip and the target surface as specified in the 3300 XL system manual. The armored cable should be routed through conduit or secured with cable ties to prevent mechanical damage or excessive vibration. Verify that all connector connections are clean, dry, and tightened until the ClickLoc mechanism is fully engaged. Use connector protectors if environmental conditions may lead to moisture or contamination at the junction points.