Bently Nevada 330104-14-19-10-11-00 3300 XL 8 mm Proximity Probe

Description

The 330104-14-19-10-11-00 is a 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 thread, armored cable construction, and a 1.0 meter total system length. This probe is a critical component of the 3300 XL 8 mm Proximity Transducer System, designed for accurate, non-contact displacement measurement in industrial rotating machinery applications such as steam and gas turbines, compressors, and pump shafts.

This specific variant utilizes Option 11 (Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable) for reliable signal transmission in challenging environments where moisture or oil seals are a concern. The 3300 XL probe system provides a linear output signal proportional to the distance between the probe tip and the observed conductive surface, essential for monitoring shaft vibration and axial position.

Features

• M10 x 1 Threaded Case: Metric thread design (Option 14 unthreaded length, Option 19 case length) for flexible mounting.
• Armored Cable Construction: Robust cable protection for demanding industrial environments.
• FluidLoc Cable Option: Equipped with FluidLoc cable (Option 11) to prevent oil or fluid migration through the cable assembly.
• 1.0 Meter Total Length: Standard length for localized Proximitor sensor installations.
• ClickLoc Connector: Miniature coaxial connector system with connector protector, ensuring secure, vibration-resistant coupling.
• Agency Approval: Option 00 specifies that no hazardous area agency approvals are required for this configuration.

Applications

• Turbine shaft vibration monitoring
• Compressor rotor position and axial displacement
• Critical machinery protection in petrochemical and power generation facilities
• General purpose industrial rotating equipment monitoring using 8 mm probe systems

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the system manual (141078) to maintain the linear operating range. Use the appropriate mounting bracket (aluminum or phenolic) based on the requirement for electrical isolation. When installing the FluidLoc cable, ensure the connection to the extension cable is kept clean and dry to maintain signal integrity. Always route cables away from high-voltage lines to prevent electromagnetic interference.