Bently Nevada 330130-070-02-05 3300 XL Standard Extension Cable

Description

The 330130-070-02-05 is a 3300 XL Standard Extension Cable configured for use with 3300 XL 8 mm proximity transducer systems. This specific variant features a 7.0 meter total cable length (Option 070) and is equipped with standard cable and connector protectors (Option 02) to maintain signal integrity in demanding industrial environments. The inclusion of Option 05 certification ensures compliance with CSA, ATEX, and IECEx hazardous area requirements.

Designed as an integral part of the 3300 XL monitoring chain, this extension cable bridges the connection between the 3300 XL proximity probe and the Proximitor sensor. It utilizes high-quality coaxial cabling to ensure accurate, low-loss transmission of eddy-current displacement signals. The connector protectors included in this configuration (Option 02) provide essential environmental shielding for the ClickLoc connectors, reducing the risk of signal degradation due to contamination or moisture ingress.

Features

• Option 070: 7.0 meter (22.9 feet) cable length.
• Option 02: Standard cable type equipped with connector protectors for enhanced durability.
• Option 05: CSA, ATEX, and IECEx hazardous area approvals.
• Compatible with all 3300 XL 8 mm proximity probes and 3300 XL Proximitor sensors.
• ClickLoc connector design for secure, reliable, and easy-to-install transducer chain connections.

Applications

This extension cable is used in critical rotating machinery protection systems where precise, non-contact eddy-current measurement of shaft vibration and axial position is required. Typical applications include:

• Steam and gas turbines
• Centrifugal compressors and pumps
• Fans and blowers
• Electric motors and generators
• Hazardous area environments requiring CSA/ATEX/IECEx certification

Ordering Information

Technical Specifications

Installation Guidelines

Proper installation of the 3300 XL extension cable is critical for system accuracy. Ensure the cable is routed away from high-voltage power lines to minimize electromagnetic interference (EMI). Use the provided connector protectors to seal the connections against oil, moisture, and debris. When installing, verify that the total length of the probe and extension cable matches the calibrated system length of the Proximitor sensor (e.g., 5-meter or 9-meter systems). Ensure all hazardous area installations adhere to local regulatory requirements for intrinsically safe equipment.

Compliance and Certifications

This product is certified for use in hazardous environments under Option 05, including CSA, ATEX, and IECEx approvals. Always consult the specific hazardous area control drawings and the system datasheet (141194) for installation restrictions and grounding requirements.