Bently Nevada 330180-52-05 3300 XL Proximitor Sensor

Description

The 330180-52-05 3300 XL Proximitor Sensor is a critical component of the 3300 XL 8 mm proximity transducer system, configured with Option 52 for total system length and Option 05 for agency approval. This sensor facilitates non-contact displacement measurements for shaft vibration and axial position on critical rotating machinery, interfacing seamlessly with 3300 XL 8 mm probes and extension cables.

The unit processes the radio frequency signal from the proximity probe, converting it into a proportional voltage output suitable for monitoring and protection systems. The 3300 XL design ensures compatibility with existing 3300 series installations while providing improved interchangeability and signal integrity. The -05 agency approval option confirms the unit is suitable for use in hazardous environments requiring CSA, ATEX, and IECEx certifications.

Features

• Designed for 3300 XL 8 mm proximity probe systems
• Option 52: Configured for specific system length requirements
• Option 05: Compliant with CSA, ATEX, and IECEx hazardous area certifications
• Near-linear output signal for accurate displacement monitoring
• Rugged housing for industrial mounting in harsh conditions
• Interchangeable with other 3300 XL components

Applications

• Turbine shaft vibration monitoring
• Compressor rotor position sensing
• Critical rotating machinery protection
• Fluid film bearing health assessment
• Industrial power generation and petrochemical process control

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the Proximitor sensor is installed in a protective, non-hazardous enclosure unless local hazardous area regulations specify otherwise. Mount the unit on a grounded DIN rail or panel. Maintain proper shielding and grounding practices to prevent electromagnetic interference. Ensure that cable connections between the probe, extension cable, and Proximitor are clean and tightened to the specified torque to prevent signal degradation.

Compliance and Certifications

This unit meets CSA, ATEX, and IECEx hazardous area requirements as specified by Option 05. Always verify the specific certification labels on the device against the intended application environment.