Bently Nevada 330425-02-00 330425 Accelerometer

Only 4 item(s) left in stock

Manufacturer: Bently Nevada
Product No.: 330425-02-00
Country of origin:United States
Product Type: Accelerometer
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 100g
Dimensions: 1.8cm x 1.6cm x 123cm
Shipping port: Xiamen
Warranty: 12 months

Description

The 330425-02-00 is an industrial-grade acceleration transducer configured with an M8 x 1 integral mounting stud (Option 02) and no hazardous area agency approvals (Option 00). Designed for critical machinery monitoring, this accelerometer provides high-frequency vibration data essential for detecting faults such as gear mesh, bearing wear, and other high-frequency phenomena. This specific configuration is intended for non-hazardous environments where standard mounting is preferred. As part of the Bently Nevada 330400 series, this unit features a 75 g peak amplitude range and a sensitivity of 25 mV/g. It is constructed with 316L stainless steel for durability in demanding industrial conditions. Proper installation on bearing housings or machine casings is required to ensure signal integrity and accurate frequency response; the integral M8 x 1 stud allows for secure mounting to machines compatible with metric threading.

Features

M8 x 1 integral mounting stud (Option 02)
No agency approvals (Option 00)
Amplitude range: 75 g peak
Sensitivity: 25 mV/g
Frequency response: 10 Hz to 15 kHz
316L stainless steel housing
3-pin MIL-C-5015 connector
Operating temperature range: -55 Celsius to +121 Celsius

Applications

Gear mesh monitoring
High-frequency vibration analysis
Bearing housing vibration monitoring
Rotating machinery protection
General-purpose industrial acceleration measurement

Ordering Information

Option	Code	Description
Orderable Part Number	330425-02-00	Accelerometer, M8 x 1 stud, No Approval
A - Mounting Thread	02	M8 x 1 integral stud
B - Agency Approval	00	None

Technical Specifications

Parameter	Specification
Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330425-02-00
Sensitivity	25 mV/g (2.5 mV/m/s2)
Amplitude Range	75 g peak
Frequency Response	10 Hz to 15 kHz
Temperature Range	-55 Celsius to +121 Celsius
Case Material	316L stainless steel
Connector	3-pin MIL-C-5015
Mounting Torque	4.1 N-m (3.0 ft-lb)
Weight	100 g typical (no cable)
IP Rating	IP 68 (sensor only)

Installation Guidelines

Ensure mounting surface is clean and flat (32 minch rms recommended).
Use the provided M8 x 1 mounting stud; apply torque to 4.1 N-m.
Install in a protected enclosure or conduit system for environmental protection.
Ensure the mating connector provides IP54 or better ingress protection.
Avoid mounting in areas exceeding specified temperature limits (-55 Celsius to +121 Celsius).

Key Features:

#Accelerometer

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

What does the 00 code in the 330425-02-00 part number indicate?

The 00 code specifies that this unit does not include hazardous area agency approvals (such as CSA, ATEX, or IECEx).

What is the difference between the 330400 and 330425 models?

The 330400 provides a 50 g peak amplitude range with 100 mV/g sensitivity, while the 330425 provides a 75 g peak amplitude range with 25 mV/g sensitivity.

Can this accelerometer be used in hazardous locations?

No, this specific configuration (Option 00) is not rated for hazardous area use. Units with hazardous area approvals require the 05 approval option.

What mounting hardware is used for this unit?

This unit (Option 02) includes an M8 x 1 integral mounting stud.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin

Technical knowledge

Why Maintenance Data Is Essential for Industrial Reliability

Maintenance data connects work orders, sensor signals, asset history, costs, and technician knowledge. Used well, it improves planning, reliability, predictive maintenance, spare-parts control, and...

July 15, 2026

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

June 23, 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

Bently Nevada 330425-02-00 330425 Accelerometer