Fully threaded 1/4-28 UNF steel probe body (Option 00 unthreaded length) with a 4.5-inch case length (Option 45) and a 1.0-meter total length (Option 10) specifies this 3300 NSv proximity probe configuration — 330901-00-45-10-02-00.
This configuration operates as part of the 3300 XL NSv Proximity Transducer System, which is used for non-contact displacement measurements in machinery with tight installation limits. This specific unarmored variant features a standard coaxial cable equipped with a miniature coaxial ClickLoc connector (Option 02) and requires no special agency approvals (Option 00). It is designed to withstand harsh process environments, offering increased chemical resistance and superior side-view characteristics compared to older legacy transducer systems.
| Option Segment | Code on This SKU | Meaning from Datasheet |
|---|---|---|
| Orderable Part Number | 330901-00-45-10-02-00 | 3300 NSv Proximity Probe, 1/4-28 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length |
| B - Overall Case Length Option | 45 | 4.5 in (114 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required (no approvals) |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330901-00-45-10-02-00 |
| Transducer System Series | 3300 XL NSv Proximity Transducer System |
| Thread Type | 1/4-28 UNF-2A |
| Armor Option | Without armor (unarmored standard cable) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Probe Cable Type | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Linear Range | 1.5 mm (60 mils), beginning at approx. 0.25 mm (10 mils) from target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% (including interchangeability error) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) over linear range |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical |
| Power Supply Requirements | -17.5 Vdc to -26 Vdc at 12 mA maximum consumption (at Proximitor sensor) |
| Probe dc Resistance (RPROBE) | 4.2 ohms +/- 0.5 ohms (center conductor to shield) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Maximum Tensile Strength | 220 N (50 lb) probe case to lead connection |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity Limits | 100% condensing, non-submersible when connectors are protected |
| Recommended Torque | 5.1 N m (45 in lb) (Maximum rated: 7.3 N m / 65 in lb) |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330901-00-45-10-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Fully threaded 1/4-28 UNF steel probe body (Option 00 unthreaded length) with a 4.5-inch case length (Option 45) and a 1.0-meter total length (Option 10) specifies this 3300 NSv proximity probe configuration — 330901-00-45-10-02-00.
This configuration operates as part of the 3300 XL NSv Proximity Transducer System, which is used for non-contact displacement measurements in machinery with tight installation limits. This specific unarmored variant features a standard coaxial cable equipped with a miniature coaxial ClickLoc connector (Option 02) and requires no special agency approvals (Option 00). It is designed to withstand harsh process environments, offering increased chemical resistance and superior side-view characteristics compared to older legacy transducer systems.
| Option Segment | Code on This SKU | Meaning from Datasheet |
|---|---|---|
| Orderable Part Number | 330901-00-45-10-02-00 | 3300 NSv Proximity Probe, 1/4-28 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length |
| B - Overall Case Length Option | 45 | 4.5 in (114 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required (no approvals) |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330901-00-45-10-02-00 |
| Transducer System Series | 3300 XL NSv Proximity Transducer System |
| Thread Type | 1/4-28 UNF-2A |
| Armor Option | Without armor (unarmored standard cable) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Probe Cable Type | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Linear Range | 1.5 mm (60 mils), beginning at approx. 0.25 mm (10 mils) from target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% (including interchangeability error) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) over linear range |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical |
| Power Supply Requirements | -17.5 Vdc to -26 Vdc at 12 mA maximum consumption (at Proximitor sensor) |
| Probe dc Resistance (RPROBE) | 4.2 ohms +/- 0.5 ohms (center conductor to shield) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Maximum Tensile Strength | 220 N (50 lb) probe case to lead connection |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity Limits | 100% condensing, non-submersible when connectors are protected |
| Recommended Torque | 5.1 N m (45 in lb) (Maximum rated: 7.3 N m / 65 in lb) |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
