Manufacturer: Bently Nevada
Product No.: 330902-00-12-10-02-05
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330902-00-12-10-02-05: 3300 XL NSv proximity probe, 1/4-28 UNF thread with armor (Option 00 unthreaded length, Option 12 case length, Option 10 total length, Option 02 connector, Option 05 agency approval). This 3300 NSv transducer is specifically engineered for applications with limited target area or tight clearance requirements, providing reliable non-contact eddy-current displacement measurement for machinery monitoring.
As part of the 3300 XL NSv Proximity Transducer System, this probe is compatible with the 330980 Proximitor Sensor and 330930 extension cable. The system is designed to maintain consistent scale factors in small-bore machinery and high-speed equipment where standard 3300 XL 8 mm probes are unsuitable due to physical size constraints.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330902-00-12-10-02-05 | 3300 NSv Proximity Probe, 1/4-28 UNF, with armor |
| A - Unthreaded Length | 00 | 0.0 in |
| B - Case Length | 12 | 1.2 in |
| C - Total Length | 10 | 1.0 m |
| D - Connector/Cable | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 05 | Multiple approvals (CSA, ATEX, IECEx) |
| Manufacturer | Bently Nevada |
| Part Number | 330902-00-12-10-02-05 |
| Probe Diameter | 1/4-28 UNF-2A |
| Probe Material | Polyphenylene sulfide (PPS) tip |
| Case Material | AISI 304 stainless steel (SST) |
| Cable Type | 75 Ohm coaxial, FEP insulated |
| Connector | Miniature coaxial ClickLoc |
| System Length | 1.0 meter (total) |
| Agency Approvals | CSA, ATEX, IECEx |
| Temperature Range (Storage) | -55 degC to +105 degC |
Ensure the probe is installed in accordance with Bently Nevada installation drawings for the corresponding hazardous area classification. Proper isolation from the machine housing ground is required, typically achieved using mounting pads for the Proximitor Sensor. Use silicone self-fusing tape to protect connectors from environmental ingress if not using factory-provided connector protectors.
This product meets the requirements of the 3300 XL NSv system as defined in the datasheet. Approvals include CSA (Class I, Div 2), ATEX, and IECEx for hazardous locations, subject to specific temperature schedules and installation drawings.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
