Option 00 (0 mm unthreaded) and Option 12 (120 mm overall case length) specify this 3300 NSv metric proximity probe configuration — 330904-00-12-05-02-00.
This transducer system component operates using non-contact eddy-current technology to measure shaft vibration and axial position on high-speed machinery with restricted target geometries. The model includes stainless steel armor to protect the 75 ohm coaxial lead against mechanical damage in demanding environments. It is mechanically and electrically compatible with Bently Nevada 3300 RAM systems, facilitating direct upgrades using the existing wiring paths.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330904 | 3300 NSv Probe, M8x1 thread, with armor |
| A: Unthreaded Length Option | 00 | 0 mm (unthreaded length) |
| B: Overall Case Length Option | 12 | 120 mm (12 cm case length, ordered in increments of 10 mm) |
| C: Total Length Option | 05 | 0.5 meter (20 inches) total length |
| D: Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E: Agency Approval Option | 00 | Not required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330904-00-12-05-02-00 |
| Product Family | 3300 XL NSv Proximity Transducer System |
| Thread Type | M8x1 metric threads |
| Armor Protection | Integrated flexible stainless steel armor (SST) |
| Unthreaded Length | 0 mm |
| Overall Case Length | 120 mm |
| Total Cable Length | 0.5 meter (20 in) |
| Connector Type | Miniature coaxial male ClickLoc connector (gold-plated brass) |
| Cable Material | 75 ohm coaxial, fluoroethylene propylene (FEP) insulation |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Linear Range | 1.5 mm (60 mils), spanning from 0.25 mm to 1.75 mm (10 mils to 70 mils) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) with AISI 4140 steel target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical |
| Recommended Case Torque | 5.1 N m (45 in lb) |
| Maximum Rated Torque | 7.3 N m (65 in lb) |
| Tensile Strength (Max Rated) | 220 N (50 lb) case-to-lead, connector-to-connector, and case-to-armor |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| System Pressure Seal | Viton O-ring differential pressure seal |
Ensure the following practices are followed during installation of the proximity probe:
The 3300 XL NSv Transducer System complies with key international standards when paired with qualified system components (Option 00 specifies standard approvals where specific hazardous area certificates are not applied directly to this SKU):
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330904-00-12-05-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0 mm unthreaded) and Option 12 (120 mm overall case length) specify this 3300 NSv metric proximity probe configuration — 330904-00-12-05-02-00.
This transducer system component operates using non-contact eddy-current technology to measure shaft vibration and axial position on high-speed machinery with restricted target geometries. The model includes stainless steel armor to protect the 75 ohm coaxial lead against mechanical damage in demanding environments. It is mechanically and electrically compatible with Bently Nevada 3300 RAM systems, facilitating direct upgrades using the existing wiring paths.
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330904 | 3300 NSv Probe, M8x1 thread, with armor |
| A: Unthreaded Length Option | 00 | 0 mm (unthreaded length) |
| B: Overall Case Length Option | 12 | 120 mm (12 cm case length, ordered in increments of 10 mm) |
| C: Total Length Option | 05 | 0.5 meter (20 inches) total length |
| D: Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E: Agency Approval Option | 00 | Not required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330904-00-12-05-02-00 |
| Product Family | 3300 XL NSv Proximity Transducer System |
| Thread Type | M8x1 metric threads |
| Armor Protection | Integrated flexible stainless steel armor (SST) |
| Unthreaded Length | 0 mm |
| Overall Case Length | 120 mm |
| Total Cable Length | 0.5 meter (20 in) |
| Connector Type | Miniature coaxial male ClickLoc connector (gold-plated brass) |
| Cable Material | 75 ohm coaxial, fluoroethylene propylene (FEP) insulation |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Linear Range | 1.5 mm (60 mils), spanning from 0.25 mm to 1.75 mm (10 mils to 70 mils) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) with AISI 4140 steel target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical |
| Recommended Case Torque | 5.1 N m (45 in lb) |
| Maximum Rated Torque | 7.3 N m (65 in lb) |
| Tensile Strength (Max Rated) | 220 N (50 lb) case-to-lead, connector-to-connector, and case-to-armor |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| System Pressure Seal | Viton O-ring differential pressure seal |
Ensure the following practices are followed during installation of the proximity probe:
The 3300 XL NSv Transducer System complies with key international standards when paired with qualified system components (Option 00 specifies standard approvals where specific hazardous area certificates are not applied directly to this SKU):
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
Input filtering can stabilize PLC data, but excessive smoothing delays alarms and masks process changes. Learn how to diagnose noise, select hardware or software filters, and validate response time.
SCR and PWM drives regulate brushed DC motors differently. Compare current ripple, low-speed torque, field control, feedback, reversing, braking energy, electromagnetic effects, and retrofit risks...
Industrial inverters synthesize controlled AC from a DC bus, but reliable operation depends on PWM, motor control, cable effects, braking energy, thermal limits, protection, and commissioning across...
