Bently Nevada 330905-00-03-10-01-00 3300 XL NSv Proximity Probe

Description

The 330905-00-03-10-01-00 is an unarmored 3300 XL NSv Proximity Probe featuring a M10x1 threaded body. This configuration includes an unthreaded length of 0.0 inches (Option 00) and a total case length of 0.3 inches (Option 03). It is designed with a 1.0 meter total system length (Option 10) and utilizes a miniature coaxial ClickLoc connector equipped with a connector protector (Option 01). This unit does not require specific agency approvals (Option 00).

The 3300 XL NSv Proximity Transducer System is specifically engineered for machinery with tight installation constraints where standard 3300 or 3300 XL 5 mm and 8 mm probes cannot be used. It is well-suited for measuring radial vibration and axial position on small shafts or targets with reduced geometry, such as those found on high-speed aeroderivative turbines and process gas compressors. The system is mechanically and electrically compatible with previous Bently Nevada 3300 RAM proximity transducer systems, allowing for seamless integration into existing monitoring chains.

Features

• M10x1 probe thread for specific mounting compatibility
• Unarmored probe construction
• 0.0 inch unthreaded length and 0.3 inch case length
• 1.0 meter total system length
• Miniature coaxial ClickLoc connector with included connector protector
• Patented TipLoc molding for robust bond between probe tip and body
• CableLoc design provides 220 N (50 lb) pull strength
• Compatible with 3300 XL NSv Proximitor Sensors and extension cables

Applications

• Radial vibration and radial position measurements on fluid-filmed bearing machines
• Axial (thrust) position measurements on small-bore machinery
• Tachometer and zero speed measurements
• Phase reference (Keyphasor signals)
• Small shaft applications less than 51 mm (2 in)
• Tight installation environments with side-view or counter-bore restrictions

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is connected to a compatible 3300 XL NSv Proximitor Sensor and extension cable.
• The use of connector protectors is recommended for all probe-to-extension cable connections to prevent liquid ingress.
• Avoid exposing the probe tip to liquids or gases with extreme pH values to prevent tip assembly erosion.
• Ensure proper gap calibration according to the specific target material and clearance requirements of the machinery.