Bently Nevada 330905-00-13-05-02-00 3300 XL NSv Proximity Probe

Description

Option 00 (0.0 in unthreaded length), Option 13 (1.3 in case length), and Option 05 (0.5 m total length) specify this 330905-00-13-05-02-00 3300 XL NSv proximity probe configuration. This eddy-current transducer is designed for machinery with limited installation space, such as aeroderivative turbines and small-bore rotating equipment where standard 5 mm or 8 mm proximity probes cannot fit or encounter excessive side-view interference. The probe functions as part of a complete 3300 XL NSv transducer system, which includes a compatible 3300 XL NSv Proximitor Sensor and extension cable. This specific configuration features an M10x1 thread and is provided without armor (Option 00 in the suffix position, referencing the 330905 base model design). It provides reliable radial vibration, axial position, and tachometer measurements in demanding environments where small target geometry or tight clearance restrictions are present.

Features

• M10x1 thread configuration (Model 330905)
• 0.0 in unthreaded length (Option 00)
• 1.3 in case length (Option 13)
• 0.5 m total system length (Option 05)
• Miniature coaxial ClickLoc connector, standard cable (Option 02)
• Non-contact sensing suitable for small targets and reduced side-view applications
• Designed for seamless integration with 3300 XL NSv Proximitor sensors

Applications

• Radial vibration and radial position measurements on shafts smaller than 51 mm (2 in)
• Axial (thrust) position measurements on flat targets smaller than 15 mm (0.6 in)
• Tachometer and zero speed measurements
• Phase reference (Keyphasor) signals
• Fluid-filmed bearing machines with tight installation requirements

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330905-00-13-05-02-00	3300 NSv Proximity Probe, M10x1, Unarmored
A - Unthreaded Length	00	0.0 in
B - Case Length	13	1.3 in
C - Total Length	05	0.5 m
D - Connector/Cable	02	Miniature coaxial ClickLoc connector, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330905-00-13-05-02-00
Probe Diameter	Approximately 5 mm
Thread Size	M10x1
Case Material	AISI 304 stainless steel
Probe Tip Material	Polyphenylene sulfide (PPS)
Cable Type	75 ohm coaxial, FEP insulated
Connector Type	Miniature coaxial ClickLoc
Operating Temperature	-55 degC to +177 degC (Probe tip)

Installation Guidelines

• Ensure the probe is installed with adequate clearance from surrounding metal to maintain specified scale factor performance.
• Use appropriate Bently Nevada connector protectors when installing in high-moisture or contaminated environments.
• Route cables away from high-voltage lines or sources of electrical noise to prevent signal interference.
• Verify system gap voltage using the associated 3300 XL NSv Proximitor sensor test pins during commissioning.

Compliance and Certifications

• Complies with EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU compliant
• Functional Safety: SIL 2 (HFT=0) / SIL 3 (HFT=1) compliant