The Bently Nevada 60M100-00 is a Wind Condition Monitor designed for continuous permanent monitoring of wind turbine generator machine trains. Operating as a compact, robust unit, the 60M100-00 processes dynamic input signals and speed inputs to detect machine defects months in advance of potential failure, supporting condition-based maintenance strategies.
The unit features up to 12 dynamic input channels and two Keyphasor speed signal inputs. Channels 1 through 10 interface with 2-wire ICP type accelerometers, while channels 11 and 12 can be configured for either 2-wire ICP transducers or 3-wire proximity probes. The 60M100-00 incorporates a 24-bit Sigma-Delta A/D converter, 40 kHz bandwidth, and integrated digital communication capabilities, transmitting monitored values and statuses via Modbus/TCP or proprietary Ethernet protocols to process control and automation systems.
| Ordering Option | Option Code | Description |
|---|---|---|
| Base Model | 60M100-AA | Bently Nevada Wind Condition Monitor (Monitor Only) |
| A: Approvals | 00 | Standard |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (a Baker Hughes business) |
| Model | 60M100-00 |
| Input Power Voltage Range | 18 Vdc to 36 Vdc |
| Current Consumption | 1.7 A Max |
| Inrush Current | 2.7 A Max, less than 5 ms |
| Module Inputs | Max 12 dynamic signals and 2 Keyphasor signals |
| Dynamic Range | 110 dB @ fs = 102.4 ksps |
| Signal/Noise Ratio | 110 dB @ fs = 102.4 ksps |
| A/D Conversion | Sigma-Delta 24 bits nominal |
| Bandwidth | 0 to 40 kHz |
| Direct pk or rms Accuracy | Within ± 0.5% of full-scale typical, ± 1.1% worst case |
| Rotor, Mesh and Fault Frequencies Accuracy | ± 6.7% typical, ± 9.7% worst case |
| Bearing Frequencies Accuracy | ± 6.7% typical, ± 9.7% worst case |
| Tower Sway Accuracy | ± 0.16 m/s2 (0.016 g) typical, ± 0.23 m/s2 (0.023 g) worst case |
| Kurtosis Accuracy | ± 1% (50 Hz to 10,000 Hz), ± 3% (1 Hz to 49.9 Hz) |
| Generator Electrical Noise Accuracy | ± 1% (50 Hz to 10,000 Hz), ± 3% (1 Hz to 49.9 Hz) |
| Crest Factor Accuracy | Within ± 0.5% of full-scale typical, ± 1.1% worst case |
| Minimum Amplitude for Crest/Skewness/Kurtosis | 0.6 m/s2 (0.06 g) |
| Keyphasor Speed Range | 1 to 120,000 rpm (limited to 2,000 rpm for wind turbines) |
| Keyphasor Speed Resolution | 0.1 rpm (1 to 100 rpm), ± 1 rpm (100 to 2000 rpm) |
| Ethernet Output Ports |
Net A: 10/100 BaseT Network DHCP Port Net B: 10/100 BaseT Local Static IP Port |
| Buffered Signal Outputs | Two 15-pin DSUB connectors (550 ohm output impedance) |
| Operating Temperature | -40 degC to +70 degC (-40 degF to 158 degF) |
| Storage Temperature | -45 degC to +85 degC (-49 degF to 185 degF) |
| Relative Humidity | 0% to 95% non-condensing operating and storage |
| Pollution Degree | Pollution Degree 2 (working voltage < 30 Vrms or 60 Vdc) |
| Mounting | DIN rail mounting |
| Dimensions (H x W x D) | 150 mm x 225 mm x 55 mm (5.89 x 8.88 x 2.17 inches) |
| Weight | 1.4 kg (3 lbs) |
| Interface / Connector | Function |
|---|---|
| CH 1 - CH 10 | Field wiring connections for 2-wire ICP type accelerometers |
| CH 11 - CH 12 | Field wiring connections for 2-wire ICP transducers or 3-wire proximity probes |
| KPH 1 - KPH 2 | Field wiring connections for Keyphasor speed sensors (3-wire proximity probes or externally powered speed sensors) |
| Net A (10/100 BaseT) | Network DHCP Ethernet port for system communications |
| Net B (10/100 BaseT) | Local Static IP Ethernet port for system communications |
| Buffered Signal Outputs | Two 15-pin DSUB connectors for diagnostic signal access |
| Power Input Connection | Terminal connector for 18 Vdc to 36 Vdc power supply |
| Chassis Ground Stud | Ground connection stud on chassis side |
| System Common Isolation Switch | Switch for system isolation |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 60M100-00
Country of origin:United States
Product Type: Wind Condition Monitor
Payment: T/T, Western Union
Weight: 1400g
Dimensions: 150 mm x 225 mm x 55 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 60M100-00 is a Wind Condition Monitor designed for continuous permanent monitoring of wind turbine generator machine trains. Operating as a compact, robust unit, the 60M100-00 processes dynamic input signals and speed inputs to detect machine defects months in advance of potential failure, supporting condition-based maintenance strategies.
The unit features up to 12 dynamic input channels and two Keyphasor speed signal inputs. Channels 1 through 10 interface with 2-wire ICP type accelerometers, while channels 11 and 12 can be configured for either 2-wire ICP transducers or 3-wire proximity probes. The 60M100-00 incorporates a 24-bit Sigma-Delta A/D converter, 40 kHz bandwidth, and integrated digital communication capabilities, transmitting monitored values and statuses via Modbus/TCP or proprietary Ethernet protocols to process control and automation systems.
| Ordering Option | Option Code | Description |
|---|---|---|
| Base Model | 60M100-AA | Bently Nevada Wind Condition Monitor (Monitor Only) |
| A: Approvals | 00 | Standard |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada (a Baker Hughes business) |
| Model | 60M100-00 |
| Input Power Voltage Range | 18 Vdc to 36 Vdc |
| Current Consumption | 1.7 A Max |
| Inrush Current | 2.7 A Max, less than 5 ms |
| Module Inputs | Max 12 dynamic signals and 2 Keyphasor signals |
| Dynamic Range | 110 dB @ fs = 102.4 ksps |
| Signal/Noise Ratio | 110 dB @ fs = 102.4 ksps |
| A/D Conversion | Sigma-Delta 24 bits nominal |
| Bandwidth | 0 to 40 kHz |
| Direct pk or rms Accuracy | Within ± 0.5% of full-scale typical, ± 1.1% worst case |
| Rotor, Mesh and Fault Frequencies Accuracy | ± 6.7% typical, ± 9.7% worst case |
| Bearing Frequencies Accuracy | ± 6.7% typical, ± 9.7% worst case |
| Tower Sway Accuracy | ± 0.16 m/s2 (0.016 g) typical, ± 0.23 m/s2 (0.023 g) worst case |
| Kurtosis Accuracy | ± 1% (50 Hz to 10,000 Hz), ± 3% (1 Hz to 49.9 Hz) |
| Generator Electrical Noise Accuracy | ± 1% (50 Hz to 10,000 Hz), ± 3% (1 Hz to 49.9 Hz) |
| Crest Factor Accuracy | Within ± 0.5% of full-scale typical, ± 1.1% worst case |
| Minimum Amplitude for Crest/Skewness/Kurtosis | 0.6 m/s2 (0.06 g) |
| Keyphasor Speed Range | 1 to 120,000 rpm (limited to 2,000 rpm for wind turbines) |
| Keyphasor Speed Resolution | 0.1 rpm (1 to 100 rpm), ± 1 rpm (100 to 2000 rpm) |
| Ethernet Output Ports |
Net A: 10/100 BaseT Network DHCP Port Net B: 10/100 BaseT Local Static IP Port |
| Buffered Signal Outputs | Two 15-pin DSUB connectors (550 ohm output impedance) |
| Operating Temperature | -40 degC to +70 degC (-40 degF to 158 degF) |
| Storage Temperature | -45 degC to +85 degC (-49 degF to 185 degF) |
| Relative Humidity | 0% to 95% non-condensing operating and storage |
| Pollution Degree | Pollution Degree 2 (working voltage < 30 Vrms or 60 Vdc) |
| Mounting | DIN rail mounting |
| Dimensions (H x W x D) | 150 mm x 225 mm x 55 mm (5.89 x 8.88 x 2.17 inches) |
| Weight | 1.4 kg (3 lbs) |
| Interface / Connector | Function |
|---|---|
| CH 1 - CH 10 | Field wiring connections for 2-wire ICP type accelerometers |
| CH 11 - CH 12 | Field wiring connections for 2-wire ICP transducers or 3-wire proximity probes |
| KPH 1 - KPH 2 | Field wiring connections for Keyphasor speed sensors (3-wire proximity probes or externally powered speed sensors) |
| Net A (10/100 BaseT) | Network DHCP Ethernet port for system communications |
| Net B (10/100 BaseT) | Local Static IP Ethernet port for system communications |
| Buffered Signal Outputs | Two 15-pin DSUB connectors for diagnostic signal access |
| Power Input Connection | Terminal connector for 18 Vdc to 36 Vdc power supply |
| Chassis Ground Stud | Ground connection stud on chassis side |
| System Common Isolation Switch | Switch for system isolation |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
