Bently Nevada 84661-40 Standard Armored Interconnect Cable

Description

The 84661-40 is a standard armored interconnect cable designed for Bently Nevada High Temperature Velomitor (HTVS) systems. This specific configuration features a 40-foot (12.2 m) length of shielded 0.382 mm2 (22 AWG) cable protected by stainless steel armor, which provides mechanical protection against abrasion and physical damage in demanding industrial environments.

The cable is equipped with a moisture-resistant female connector at the HTVS transducer end and ring lugs at the monitor end, ensuring reliable signal transmission for vibration monitoring applications. By utilizing this armored cabling, operators can extend the HTVS sensor's reach while maintaining signal integrity in areas where cables are exposed to potential impact, debris, or harsh industrial conditions.

Features

• 40-foot (12.2 m) total cable length
• Stainless steel armor for enhanced abrasion and crush resistance
• Shielded 0.382 mm2 (22 AWG) wire for noise reduction
• Moisture-resistant female connector (HTVS end)
• Ring lug termination (Monitor end)
• Operating temperature range: -29 C to 121 C (-20 F to 250 F)

Applications

• High-temperature machinery casing vibration monitoring
• Critical rotating machinery protection where cabling requires mechanical armor
• Industrial environments with high risk of cable abrasion or physical impact
• Power generation, oil and gas, and petrochemical facility assets

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the cable is routed in a way that minimizes exposure to extreme heat sources beyond the specified 121 C limit for the cable. Use appropriate cable clamps and stainless steel ties to secure the armored cable and prevent strain on the connectors. When installing in hazardous areas, ensure the complete monitoring loop (transducer, cable, and monitor) complies with local electrical codes and the specific agency approvals required for the installation site.