Manufacturer: Honeywell
Product No.: 2MLR-M06P
Country of origin:United States
Product Type: PLC CPU Bases
Payment: T/T, Western Union
Weight: 1000g
Dimensions: 346 mm x 98 mm x 19 mm
Shipping port: Xiamen
Warranty: 12 months
The integration of multi-slot architecture within redundant control topologies is facilitated by the Honeywell 2MLR-M06P base unit, which serves as a dedicated 6-slot main CPU backplane for the MasterLogic programmable controller series. This backplane acts as the physical and electrical foundation, providing high-speed bus communication and power distribution lines to individual processor and expansion modules. Engineered for maximum physical stability, the Honeywell 2MLR-M06P structural chassis ensures reliable alignment of critical pin connectors, preventing communication dropouts under continuous industrial vibration.
| Manufacturer | Honeywell |
| Model Number | 2MLR-M06P |
| Product Series | MasterLogic 200R |
| Module Capacity | 6 Slots (Main Base) |
| Compatible Processor Series | 2MLR-CPUH/T, 2MLR-CPUH/F |
| Current Consumption | 211 mA |
| Flammability Rating | UL 94V-0 |
| Physical Dimensions | 346 mm x 98 mm x 19 mm |
| Net Weight | 0.34 kg |
| Shipping Weight (Calculated) | 1.00 kg |
The 2MLR-M06P base maintains identical physical dimensions and signal routing properties as corresponding modules within the OEM co-developed LS Electric XGR series (specifically the XGR-M06P). System integrators must verify that firmware configurations (such as Ver 5.1 and higher) are aligned across both redundant CPU units before mounting them to this unified bus.
To prevent micro-disconnections along the high-speed CPU synchronization bus, ensure that the mounting panel is completely flat. Mounting the 2MLR-M06P onto an uneven surface can induce physical torsion on the backplane PCB, causing intermittent "Module Pull-Out" alarms or unexpected failovers. Provide sufficient vertical clearance of at least 50 mm above and below the rack to maintain natural convection cooling across installed components.
Ensure that the grounding terminal on the power supply module attached to this base is connected directly to a low-impedance earth ground using minimum 2.0 mm² (14 AWG) copper wire. Floating ground potentials on the base plate can introduce high-frequency noise into the system backplane, resulting in checksum errors and degradation of the internal parallel bus communications.
Do not install, remove, or modify any modules on the 2MLR-M06P base plate while the system is energized. Failure to completely de-energize the main rack power supply can generate severe transient electrical arcs, permanently damaging the high-speed bus transceivers inside the backplane and any mounted CPU or expansion modules.
Position the empty base plate against a clean, flat mounting panel inside the enclosure and align it with the pre-drilled M4 tapped screw holes.
Securely tighten the mounting screws across all specified anchoring points to guarantee proper grounding and prevent mechanical flexure.
Verify that all backplane slot connectors are completely free of dust and debris before sliding and locking the CPU and functional modules into place.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
