Manufacturer: Honeywell
Product No.: 51195479-300
Country of origin:United States
Product Type: DCS Connection Cables
Payment: T/T, Western Union
Weight: 500g
Dimensions: 320 x 320 x 80 mm
Shipping port: Xiamen
Warranty: 12 months
Engineered for high-integrity industrial control system architectures, the Honeywell 51195479-300 functions as a dual-channel redundant I/O Link connection cable set designed for legacy TDC 3000 and Experion PKS systems. This critical interface assembly provides the physical communication path between Input/Output Processors (IOPs) or I/O Link Modules (IOLIMs) and their respective Field Termination Assemblies (FTAs), ensuring dependable data transmission and fault-tolerant operation in demanding process environments.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Honeywell |
| Model Number | 51195479-300 |
| Interface Type | I/O Link Redundant Bus Interface |
| System Compatibility | TDC 3000, Experion PKS (IOLIM, IOP, FTA) |
| Cable Configuration | Redundant pair (Set of 2 cables) |
| Shielding Type | Overall tinned copper braid with drain wire |
| Country of Origin | United States |
| Shipping Weight (Calculated) | 2.0 kg |
| Package Dimensions (Calculated) | 320 x 320 x 80 mm |
The Honeywell 51195479-300 is length-specific. Using mismatched cable lengths on redundant Link A and Link B paths can introduce slight propagation delays and skew. Always replace both cables in a redundant link simultaneously using a matched set to prevent transient desynchronization faults on the I/O bus.
During system retrofits, ensure the I/O Link cable is routed away from high-voltage AC distribution tracks or variable frequency drive (VFD) output lines. Even with integrated industrial shielding, close proximity to high-energy switching transients can corrupt high-speed communication frames, leading to intermittent module switchovers or loss of view on critical process variables.
Always check the integrity of the chassis ground springs at the entry point of the IOP cabinet. If the braided shield of the 51195479-300 cable set is not properly bonded to the cabinet ground plane, common-mode noise will seek a path through the internal electronics, potentially triggering hardware faults on adjacent analog input channels.
Disconnect control power from the respective IOP or IOLIM modules before executing cable installations or swaps. Inserting or extracting I/O Link cables while the bus is active can cause unintended signal interruptions, bus contention, or safety-related module trip conditions.
Verify that the cabinet power is isolated and trace the existing routing path to ensure sufficient slack remains at bend points.
Align the physical keyway on the multi-pin connector of the 51195479-300 with the matching receptacle on the IOP card or FTA card.
Gently push the connector until it is fully seated, then secure any integrated locking screws or retaining clips to prevent vibration-induced loosening.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
