Manufacturer: Omron
Product No.: CP1E-N40DT1-A
Country of origin:Japan
Product Type: PLC CPU Modules
Payment: T/T, Western Union
Weight: 2500g
Shipping port: Xiamen
Warranty: 12 months
The Omron CP1E-N40DT1-A serves as a highly functional programmable controller within the SYSMAC CP family, designed for micro-PLC applications requiring integrated communication and motion control capability. Featuring 40 integrated input/output points, this unit provides a balanced solution for small-to-medium industrial control systems. It is powered by a standard AC voltage supply and utilizes a high-efficiency processor to manage logic execution, high-speed counting, and positioning commands.
As an N-type (Application Type) CPU, this module is equipped with a built-in RS-232C serial port alongside a standard USB port for programming. An integrated option slot allows engineers to expand communication interfaces by adding RS-422/485 or Ethernet cards without increasing the physical footprint. The output structure is designed with PNP transistor outputs, ensuring reliable, high-speed switching for solid-state relays, solenoids, and motor drives.
| Manufacturer | Omron |
| Part Number / Model | CP1E-N40DT1-A |
| Series | SYSMAC CP-series (CP1E) |
| Supply Voltage | 100 to 240 VAC, 50/60 Hz |
| Operating Voltage Range | 85 to 264 VAC |
| Power Consumption | 50 VA maximum |
| Number of Inputs | 24 inputs (24 VDC, 4.3 mA) |
| Number of Outputs | 16 outputs (Transistor, PNP, sourcing) |
| Output Switching Capacity | 24 VDC, 0.3 A per output; 0.9 A per common; 3.6 A per unit |
| Program Capacity | 8K steps |
| Data Memory Capacity | 8K words |
| Built-in Interfaces | USB 2.0 (Type-B), RS-232C (D-sub 9-pin) |
| Expansion Slots | 1 communication / analog option board slot |
| High-Speed Counters | 6 phases (100 kHz for 2 axes, 10 kHz for 4 axes) |
| Pulse Outputs | 2 axes (100 kHz each, PNP sourcing) |
| Ambient Operating Temperature | 0 to 55 degC |
| Ambient Operating Humidity | 10% to 90% RH (non-condensing) |
To ensure optimal performance and heat dissipation, the CPU unit must be mounted vertically on a standard 35 mm DIN rail inside a protective electrical enclosure. Maintain a minimum clearance of 50 mm above and below the device to facilitate natural air circulation. All wiring must conform to local electrical codes; use shielded cables for high-speed counter and analog signal routing to prevent electromagnetic interference. Prior to powering the unit, verify that the AC supply voltage is within the specified 85 to 264 VAC range and that the functional ground terminal is connected securely to a low-resistance ground point.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
A practical replacement guide for the GE Fanuc IC693CPU313, covering its embedded five-slot architecture, memory backup, firmware-dependent capacity and why it cannot use Series 90-30 expansion racks.
A field-focused comparison of Bently Nevada 3500/40M and 3500/42M monitor inputs, channel-pair configuration, rear I/O options, external termination hardware and firmware checks before replacement.
A field checklist for diagnosing Allen-Bradley 1746-NR4 RTD and resistance inputs, including sensor curves, lead compensation, excitation current, filter timing and channel diagnostics.
A field-focused checklist for replacing an Allen-Bradley 1785-L40B or planning a PLC-5/40 migration, covering backups, 1771 I/O mapping, DH+/RIO channels, revision risks and commissioning.
Replacing an Allen-Bradley 1747-SN scanner? Check SLC 500 logical rack and G-file mapping, link speed, cable termination, COMM/FAULT LEDs and hardware series before blaming the module or changing the...
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
