Description
The Siemens 6AV7613-0AA22-0AF0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display and is powered by a Pentium III 500 MHz CPU. The standard configuration includes 128 MB of RAM, a 20 GB hard drive, and operates on a 24 V DC power supply. It comes pre-installed with the Windows 98 operating system in English. Note that this product is considered obsolete by the manufacturer, making it a critical spare part for maintaining existing systems.
Features
- Integrated 12-inch TFT color display for clear visualization.
- Powered by an Intel Pentium III 500 MHz processor.
- Equipped with 128 MB of system RAM.
- Includes a 20 GB internal hard drive for data and application storage.
- Operates on a nominal 24 V DC industrial power source.
- Pre-loaded with Windows 98 (English version) operating system.
Applications
- Machine-level operator control and monitoring
- Process visualization and data logging
- Factory floor HMI stations
- Supervisory control and data acquisition (SCADA) nodes
- Replacement unit for legacy automation systems
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 670 |
| Model Number |
6AV7613-0AA22-0AF0 |
| Display |
12-inch TFT |
| Processor (CPU) |
Pentium III 500 MHz |
| Memory (RAM) |
128 MB |
| Storage |
20 GB Hard Drive (HD) |
| Operating System |
Windows 98 (English) |
| Input Voltage |
24 V DC |
| Product Lifecycle Status |
Obsolete |
| Country of Origin |
Germany (Estimate) |
| Shipping Weight |
12.00 kg |
| Package Dimensions |
35.0 cm x 25.0 cm x 25.0 cm |
| Commodity Code |
85371091 |
| ECCN |
N |
Installation Guidelines
CRITICAL WARNING: This equipment is sensitive to electrostatic discharge (ESD) and incorrect voltage. Always de-energize the main control panel and follow lock-out/tag-out (LOTO) procedures before installation. Use a properly grounded wrist strap when handling the unit.
-
1
Verify the panel cutout dimensions match the Panel PC's requirements. Ensure the mounting surface is clean, flat, and can support the unit's weight.
-
2
Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel. Do not over-torque the clamps.
-
3
Connect a dedicated functional earth (FE) or protective earth (PE) conductor to the designated grounding terminal on the chassis. This is critical for noise immunity and safety.
-
4
Connect the 24 V DC power supply. Verify the polarity (+/-) is correct before applying power. Use a stable, regulated power source rated for industrial environments.
-
5
Connect all required communication and peripheral cables. Route cables to avoid sharp bends and interference from high-voltage power lines.