Description
The Siemens 6AV7613-0AB30-0CJ0 is a SIMATIC Panel PC 670, an integrated human-machine interface (HMI) solution for industrial environments. This unit features a 12-inch TFT display and is powered by an Intel Celeron 300 MHz processor. It comes configured with 256 MB of RAM, a 20 GB hard drive, and an integrated CD-ROM drive. The system is pre-installed with the Windows NT 4.0 English operating system and is designed for a wide input voltage range of 115-230V AC, supplied with a European mains cable.
Features
- 12-inch color TFT display for process visualization.
- Intel Celeron 300 MHz processor.
- 256 MB of installed RAM.
- 20 GB hard drive for application and data storage.
- Integrated CD-ROM drive for software installation.
- Pre-loaded with Windows NT 4.0 (English).
- Wide-range power supply (115-230V AC).
Applications
- Machine-level operator control and monitoring.
- Process visualization and data acquisition systems.
- Factory floor information terminals.
- Industrial control system HMI applications.
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Product Line |
SIMATIC Panel PC |
| Series |
PC670 |
| Display |
12-inch TFT |
| Processor (CPU) |
Celeron 300 MHz |
| Memory (RAM) |
256 MB |
| Storage |
20 GB Hard Drive (HD) |
| Optical Drive |
CD-ROM |
| Operating System |
Windows NT 4.0 (English) |
| Input Voltage |
115-230 V AC |
| Supplied Cable |
European Mains Cable |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Harmonized Tariff Code |
85371091 |
| Export Control (ECCN) |
N (Not subject to control) |
| Country of Origin |
Germany (Estimated) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
45 x 35 x 20 cm |
Installation Guidelines
CRITICAL WARNING: Hazardous voltages are present. Installation must be performed by qualified personnel only. Ensure all power sources are de-energized and locked out/tagged out (LOTO) before beginning any work. Failure to comply can result in severe injury or death.
-
1
Verify Panel Cutout: Before mounting, confirm that the enclosure or panel cutout dimensions match the PC670's required installation dimensions. Ensure the mounting surface is clean, flat, and rigid.
-
2
Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
-
3
Establish Protective Earth (PE) Connection: Connect a low-impedance protective earth conductor to the designated PE terminal on the Panel PC chassis. This is a critical safety connection and must be established before connecting any other cables.
-
4
Connect Power and Peripherals: Connect the AC mains power cable to the unit's power input. Connect any required communication cables (e.g., Ethernet, serial) and peripherals (e.g., keyboard, mouse). Ensure proper cable strain relief.
-
5
Power-On and System Check: After verifying all connections are secure and the work area is clear, remove the LOTO device and energize the circuit. Power on the Panel PC and verify that the operating system boots correctly.