Description
The Siemens 6AV7614-0AB12-0BF0 is a SIMATIC Panel PC 670, an integrated human-machine interface (HMI) designed for industrial control and visualization tasks. This unit features a 15-inch TFT touch display and is powered by a Pentium III 500 MHz processor. The standard configuration includes 64 MB of RAM, a 20 GB hard drive, and an integrated CD-ROM drive. It is supplied with a U.S. mains power cable for operation on 115-230V systems and comes pre-installed with the Windows 98 operating system in English. Please note that this product is considered obsolete, making it suitable for maintaining or repairing legacy automation systems.
Features
- 15-inch TFT color touch display for operator interaction.
- Powered by a Pentium III 500 MHz CPU.
- Equipped with 64 MB of system RAM.
- Includes a 20 GB hard drive for application and data storage.
- Integrated CD-ROM drive for software installation and data access.
- Pre-loaded with Windows 98 (English version).
- Supports a wide input voltage range of 115-230V AC.
Applications
- Legacy machine control and process visualization.
- Supervisory control and data acquisition (SCADA) nodes.
- Industrial data logging and reporting stations.
- Spare part for existing SIMATIC PC 670 installations.
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model Number |
6AV7614-0AB12-0BF0 |
| Product Series |
SIMATIC Panel PC 670 |
| Product Type |
Panel PC |
| Display |
15-inch TFT Touch Display |
| Processor (CPU) |
Pentium III, 500 MHz |
| Memory (RAM) |
64 MB |
| Storage |
20 GB Hard Drive (HD) |
| Optical Drive |
CD-ROM |
| Operating System |
Windows 98 (English) |
| Input Voltage |
115-230 V |
| Included Accessories |
U.S. Mains Cable |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimate) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
45 cm x 35 cm x 15 cm |
Installation Guidelines
CRITICAL WARNING: Installation must be performed by qualified personnel only. Failure to adhere to safety procedures can result in equipment damage, severe injury, or death. Always de-energize and lock out/tag out (LOTO) all power sources before handling, installing, or servicing this equipment.
-
1
Prepare Panel Cutout: Verify that the control cabinet or panel has a correctly sized and prepared cutout for the Panel PC. Ensure the mounting surface is clean, flat, and rigid to support the unit's weight and provide a proper seal.
-
2
Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamps evenly in a cross-pattern to ensure uniform pressure on the gasket for a proper seal. Do not overtighten.
-
3
Connect Protective Earth (PE): Connect a low-impedance protective earth conductor to the designated PE terminal on the chassis. This is a critical safety connection to protect against electrical shock.
-
4
Connect Power Supply: Connect the mains power cable to the unit's power input. Ensure the source voltage (115-230V) matches the system requirements. Route the power cable away from sensitive signal and communication lines to minimize electrical noise.
-
5
Connect Peripherals: Connect all required communication cables (e.g., Ethernet, serial) and I/O devices. Ensure all connectors are fully seated and secured. Power on the unit only after all connections are made and the enclosure is safely closed.