Description
The Siemens 6AV7615-0AF22-0AJ0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This standard configuration unit is equipped with a 15-inch TFT display, a Pentium III 500 MHz CPU, and 128 MBYTE of RAM. For data storage and software installation, it includes a 40 GB hard drive and a CD-ROM drive. The system operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 English operating system. Please note that this product line is considered obsolete by the manufacturer.
Features
- 15-inch TFT color display for clear process visualization
- Integrated Pentium III 500 MHz processor
- 128 MBYTE of system memory (RAM)
- 40 GB hard disk drive for application and data storage
- Includes a CD-ROM drive
- Operates on a standard 24 V DC industrial power supply
- Pre-loaded with Windows NT 4.0 (English)
Applications
- Machine-level HMI and process visualization
- Supervisory Control and Data Acquisition (SCADA) nodes
- Industrial data logging and reporting stations
- Plant floor control and monitoring interfaces
- Integration into manufacturing execution systems (MES)
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 670 |
| Model Number |
6AV7615-0AF22-0AJ0 |
| Product Type |
Panel PC |
| Display |
|
| Display Size |
15 inch |
| Display Type |
TFT |
| Processing & Storage |
|
| CPU |
Pentium III 500 MHz |
| RAM |
128 MBYTE |
| Storage |
40 GB Hard Drive (HD) |
| Optical Drive |
CD-ROM |
| Software |
|
| Operating System |
Windows NT 4.0 English |
| Electrical |
|
| Input Voltage |
24 V DC |
| Logistics |
|
| Product Lifecycle Phase |
Obsolete |
| Commodity Code |
85371091 |
| ECCN |
N |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
35.0 x 25.0 x 25.0 cm |
| Shipping Weight |
12.00 kg |
Installation Guidelines
CRITICAL WARNING: Electrical hazard. Installation must be performed by qualified personnel only. De-energize all power sources and follow Lockout/Tagout (LOTO) procedures before accessing any terminals or making connections. Failure to comply can result in severe injury or death.
-
1
Panel Cutout and Mounting: Prepare the control cabinet panel cutout according to the device's mechanical specifications. Ensure the mounting surface is clean, flat, and rigid. Secure the Panel PC using all provided mounting clamps, tightening them evenly to ensure a proper seal against the panel gasket.
-
2
Power Connection: Connect a stable, filtered 24 V DC power supply to the designated power terminals. Use appropriately sized conductors for the load and distance. Ensure the power supply is properly grounded and provides overcurrent protection.
-
3
Protective Earth (PE) Grounding: Connect the chassis grounding terminal to the main protective earth bus bar of the control cabinet using a low-impedance conductor. This is critical for operator safety and electromagnetic compatibility (EMC).
-
4
Ventilation and Environment: Ensure adequate ventilation clearance around the unit's rear heatsink to allow for proper heat dissipation. Do not block air vents. Operate the unit within its specified ambient temperature and humidity ranges to prevent overheating and premature failure.