Description
The Siemens 6AV7802-0BA00-0AA0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) applications. This unit features a 15-inch touch display with a resolution of 1024x768 pixels and a convenient front-side USB interface. It is powered by an Intel Celeron M 370 processor operating at 1.5 GHz and is equipped with 256 MB of DDR266 SDRAM. For data storage, it includes an 80 GB SATA hard drive. This model is supplied without an operating system, providing flexibility for custom software installation. The integrated power supply supports a wide input range of 110-230V AC.
Features
- 15-inch color touch screen display
- 1024 x 768 pixel screen resolution
- Integrated Intel Celeron M 370 processor (1.5 GHz)
- 256 MB DDR266 SDRAM for application processing
- 80 GB SATA 3.5-inch hard drive for local storage
- Front-accessible USB interface for peripheral connection
- Wide-range AC power supply (110-230V AC)
- Supplied without an operating system or optical drive
Applications
- Process visualization and control
- Machine-level data acquisition and logging
- Factory automation control panels
- Supervisory Control and Data Acquisition (SCADA) nodes
- Industrial information terminals
Technical Specifications
| Specification |
Value |
| Product Type |
Panel PC |
| Display |
15-inch Touch Screen |
| Resolution |
1024 x 768 pixels |
| Processor |
Intel Celeron M 370 / 1.5 GHz |
| Front Side Bus (FSB) |
400 MHz |
| Cache |
1 MB SLC |
| Memory |
256 MB DDR266 SDRAM (1x256MB) |
| Storage |
80 GB SATA Hard Drive (3.5-inch) |
| Interfaces |
Front Side USB |
| Power Supply |
110-230V AC |
| Software |
No Operating System included |
| Optical Drive |
Not included |
| Product Lifecycle Status |
Obsolete |
| Shipping Weight |
17.00 kg |
| Commodity Code |
85371098 |
| ECCN |
N |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
67.0 x 83.0 x 11.5 cm |
Installation Guidelines
CRITICAL WARNING: ELECTRICAL HAZARD
Disconnect and lock out all power sources before installation or maintenance. This equipment is operated at hazardous voltages. Failure to de-energize the system can result in severe injury or death. Installation must be performed by qualified personnel only.
-
1
Panel Preparation: Ensure the mounting cutout in the industrial enclosure meets the dimensional requirements for the PC 677. Verify that the panel surface is clean, flat, and free of debris to ensure a proper seal.
-
2
Mounting: Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure uniform pressure and maintain the specified IP rating. Do not over-torque.
-
3
Grounding: Connect a dedicated protective earth (PE) conductor to the designated grounding terminal on the Panel PC chassis. A low-impedance ground connection is critical for safety and noise immunity.
-
4
Power Connection: Connect the AC power cable to the unit's power input. Ensure the source voltage (110-230V AC) is within the specified range. Route the power cable separately from signal and communication cables to minimize electromagnetic interference.
-
5
System Startup: After all connections are secure and the enclosure is closed, re-apply main power to the panel. The unit will power on, and the user is responsible for installing a compatible operating system and application software.