Siemens 6AV7803-0BB00-1AA0 SIMATIC Panel PC 677 Panel PC

Description

This is a SIMATIC Panel PC 677, part number 6AV7803-0BB00-1AA0, from Siemens. It is an industrial computer designed for human-machine interface (HMI) and control applications. This unit features a 15-inch display with a keypad interface and a resolution of 1024 x 768 pixels. It is powered by a Pentium M 770 1.6 GHz processor and is configured with 256 MB of DDR266 SDRAM and an 80 GB SATA hard drive. The panel includes a front-side USB interface for convenient peripheral access and is supplied without an operating system, allowing for custom software installation. This specific model is designated as obsolete, making it suitable for legacy system maintenance and spare parts inventory.

Features

• 15-inch display with integrated keypad for operator input
• 1024 x 768 pixel screen resolution
• Convenient front-side USB interface
• Equipped with a Pentium M 770 1.6 GHz processor
• Includes 256 MB DDR266 SDRAM and an 80 GB SATA hard drive
• Integrated DVD-ROM optical drive
• Wide input voltage range of 110-230V AC
• Supplied without a pre-installed operating system

Applications

• Human-Machine Interface (HMI) for industrial machinery
• SCADA system visualization and control nodes
• Process monitoring in manufacturing and production lines
• Data logging and acquisition terminals
• Replacement unit for existing SIMATIC PC 677 installations

Technical Specifications

Installation Guidelines

1. 1 De-energize System: Before beginning installation, completely disconnect all power sources from the control cabinet. Verify the absence of voltage using a calibrated multimeter. Apply appropriate LOTO devices.
2. 2 Panel Cutout and Mounting: Prepare the enclosure panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and free of debris. Install the Panel PC into the cutout and secure it evenly using all provided mounting clamps to ensure a proper seal.
3. 3 Protective Earth (PE) Connection: Connect the chassis ground terminal of the Panel PC to the enclosure's main protective earth bus bar using a low-impedance conductor. This is a critical safety connection.
4. 4 Power and I/O Wiring: Connect the AC power supply cable to the designated terminals. Route all communication and I/O cables away from high-voltage lines to minimize electromagnetic interference. Ensure all cable connectors are fully seated and secured.
5. 5 System Power-Up: After verifying all connections are correct and secure, remove LOTO devices and re-energize the cabinet. The Panel PC should power on. Proceed with operating system and application software installation.