Description
The Siemens 6AV7803-0BB10-1AC0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch keypad display with a resolution of 1024 x 768 pixels and a convenient front-side USB interface. It is powered by an Intel Pentium M 1.6 GHz processor and comes pre-installed with the Windows XP Professional multi-language operating system, providing a robust platform for plant-floor visualization and data management.
Features
-
■15-inch keypad-operated color display
-
■Intel Pentium M 1.6 GHz processor with 533 MHz FSB
-
■512 MB DDR266 SDRAM installed
-
■80 GB 3.5-inch SATA hard drive for local data storage
-
■Integrated DVD-ROM optical drive
-
■Front-accessible USB interface for peripheral connection
-
■Wide input voltage range of 110-230V AC
-
■Pre-loaded with Windows XP Professional (Multi-Language)
Applications
-
■Machine-level operator control and monitoring
-
■Process visualization and SCADA systems
-
■Data logging and acquisition at the plant floor
-
■Industrial automation and control panels
Technical Specifications
| Category |
Specification |
| General |
| Product Type |
Panel PC |
| Series |
SIMATIC Panel PC 677 |
| PLM Product Phase |
Obsolete |
|
| Display & Interface |
| Screen Size |
15 inch |
| Operator Input |
Keypad |
| Resolution |
1024 x 768 pixels |
| Interfaces |
Front Side USB |
|
| Processing & Memory |
| Processor |
Pentium M770, 1.6 GHz |
| Front Side Bus (FSB) |
533 MHz |
| Cache |
2MB SLC (Second Level Cache) |
| RAM |
512 MB DDR266 SDRAM (1x512MB) |
|
| Storage & Drives |
| Hard Drive |
80 GByte SATA, 3.5 inch |
| Optical Drive |
DVD-ROM |
|
| Software |
| Operating System |
Windows XP Professional MUI (EN, GE, FR, IT, SP, JP, CHN, KOR) |
|
| Electrical |
| Power Supply |
110-230V AC |
| Power Cable |
Included (Europe) |
|
| Logistics |
| Manufacturer |
Siemens |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
67.00 x 83.00 x 11.50 cm |
| Shipping Weight |
17.00 kg |
| Commodity Code |
85371091 |
| ECCN |
N |
|
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Disconnect all power sources before installation or servicing. Failure to de-energize equipment can result in severe injury or death. Installation must be performed by qualified personnel only.
-
1
Prepare Panel Cutout: Verify the panel cutout dimensions against the device's mounting specifications. Ensure the mounting surface is flat, clean, and rigid enough to support the unit's weight (17.00 kg).
-
2
Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamps evenly in a cross-pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
-
3
Establish Ground Connection: Connect the chassis ground terminal to the main panel's protective earth (PE) busbar using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
-
4
Connect Power: Connect the AC power cable to a stable, correctly rated power source (110-230V AC). Ensure the power source is protected by an appropriate circuit breaker or fuse. Route power cables separately from signal and communication lines.
-
5
Connect Peripherals: Connect necessary communication cables (e.g., Ethernet) and peripherals (e.g., USB devices). Ensure all connectors are fully seated and secured. Power on the unit and verify system boot and operation.