Description
The Siemens 6AV7812-0BC10-1AB0 is a SIMATIC Panel PC 877 designed for industrial human-machine interface (HMI) applications. This unit features a 15-inch touchscreen display with a 1024 x 768 resolution, providing a clear and interactive operator interface. It is powered by a Pentium 4 Mobile 2.2 GHz processor and comes equipped with 512 MB of DDR266 SDRAM and a 40 GByte EIDE hard drive. A front-side USB port allows for convenient connection of peripherals. The system is pre-loaded with the Windows 2000 Professional Multi-User Interface (MUI) operating system. Note that this product is considered obsolete by the manufacturer.
Features
- 15-inch color touchscreen display
- 1024 x 768 pixel native resolution
- Integrated Pentium 4 Mobile 2.2 GHz processor
- 512 MB DDR266 SDRAM for application processing
- 40 GByte EIDE 3.5-inch hard disk drive for storage
- Built-in DVD-ROM drive
- Convenient front-panel USB interface
- Pre-installed Windows 2000 Professional (MUI)
Applications
- Machine-level operator control and monitoring
- Process visualization and data acquisition
- Industrial control room HMI stations
- Factory automation and plant floor interfaces
Technical Specifications
| Specification |
Value |
| Manufacturer |
Siemens |
| Product Series |
SIMATIC Panel PC 877 |
| Product Lifecycle Status |
Obsolete |
| Display |
| Type |
15-inch Touchscreen |
| Resolution |
1024 x 768 pixels |
| Processing |
| Processor |
Pentium 4 Mobile |
| CPU Clock Speed |
2.2 GHz |
| Front Side Bus (FSB) |
400 MHz |
| Second Level Cache (SLC) |
512 KB |
| Memory & Storage |
| RAM |
512 MB DDR266 SDRAM (1x 512MB) |
| Hard Drive |
40 GByte HDD EIDE 3.5" |
| Optical Drive |
DVD-ROM |
| Interfaces |
| Front Interface |
USB |
| Power Supply |
| Input Voltage |
110 - 230V AC |
| Power Cable |
Europe standard |
| Software |
| Operating System |
Windows 2000 Professional MUI (EN, GE, FR, IT, SP, JP, CHN, KOR) |
| Logistics & Compliance |
| Country of Origin |
Germany (Estimated) |
| Package Dimensions (Calculated) |
60.0 x 56.5 x 30.0 cm |
| Shipping Weight |
17.00 kg |
| Commodity Code |
85371098 |
| ECCN |
N |
Installation Guidelines
CRITICAL WARNING: RISK OF ELECTRIC SHOCK
Installation must be performed by qualified personnel only. Disconnect and lock out all power sources before accessing the control panel or making any connections. Failure to de-energize equipment can result in severe injury or death.
-
1
Verify that the panel cutout dimensions match the unit's specifications for a secure and proper fit. Ensure the mounting surface is flat and clean.
-
2
Confirm the control cabinet is fully de-energized and locked out. Use a multimeter to verify zero-energy state at the intended power connection points.
-
3
Insert the Panel PC into the cutout from the front of the panel. Install and tighten all mounting clamps evenly around the bezel to the manufacturer's recommended torque to ensure a proper seal.
-
4
Connect the Protective Earth (PE) conductor to the designated terminal on the unit chassis. This connection is critical for safety and must be made first.
-
5
Connect the AC power supply cable to the unit's power input connector. Ensure the source voltage matches the 110-230V AC rating.
-
6
Connect any required peripherals, such as keyboards or memory devices, to the available USB and communication ports.
-
7
After closing the cabinet and removing the lockout/tagout device, re-apply power to the system and verify that the Panel PC boots correctly.