Siemens 6AV7872-0DC30-1AC0 SIMATIC Panel PC 677B Industrial Panel PC

Description

The Siemens 6AV7872-0DC30-1AC0 is a SIMATIC Panel PC 677B designed for industrial control and visualization applications. This unit integrates a 15-inch touchscreen display with a 1024 x 768 resolution into a ruggedized chassis suitable for plant-floor environments. It is powered by an Intel Core 2 Duo T5500 1.66 GHz processor and is equipped with 2 GB of DDR2 RAM and a 160 GB SATA hard drive. Connectivity options are extensive, including dual Gigabit Ethernet ports, multiple USB 2.0 interfaces, a serial port, and an integrated PROFIBUS/MP interface for field-level communication. The system is pre-installed with Windows XP Professional and includes an internal 110/230 V AC power supply.

Features

• 15-inch resistive touchscreen display with 1024 x 768 pixel resolution
• Intel Core 2 Duo T5500 processor operating at 1.66 GHz
• 2 GB of installed DDR2 RAM
• 160 GB 3.5-inch SATA Hard Disk Drive for OS and application storage
• Integrated DVD+/-RW optical drive
• Dual 10/100/1000 Mbit/s Ethernet ports for network redundancy or separation
• Built-in PROFIBUS/MP interface for direct PLC and field device connection
• Front-panel USB 2.0 port for convenient data transfer and peripheral access
• Two available PCI slots for hardware expansion
• Pre-installed with Windows XP Professional Multi-User Interface (MUI)

Applications

• Human-Machine Interface (HMI) for machine control
• Supervisory Control and Data Acquisition (SCADA) nodes
• Process visualization and monitoring stations
• Industrial data logging and analysis
• Factory automation control panels

Technical Specifications

Installation Guidelines

1. 1 Verify that the panel cutout dimensions match the unit's specifications. Ensure the mounting surface is clean, flat, and can support the device weight.
2. 2 Insert the Panel PC into the cutout from the front. Secure the unit from the rear using all provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel.
3. 3 Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This is a mandatory safety connection.
4. 4 Connect Ethernet, USB, serial, and PROFIBUS cables as required by the application. Ensure all connectors are fully seated and secured. Use appropriate cable management to prevent strain on the ports.
5. 5 Ensure the local power source matches the 110/230 V AC rating of the unit. Connect the provided AC power cable to the unit's power inlet and then to the de-energized power source.
6. 6 After verifying all connections are correct and secure, remove the LOTO device and apply power to the Panel PC.