Siemens 6AV7894-0BB21-1AE0 SIMATIC IPC677C Panel PC

Description

The Siemens 6AV7894-0BB21-1AE0 is a SIMATIC HMI IPC677C Panel PC designed for industrial human-machine interface (HMI) applications. This robust Panel PC integrates a 19-inch touch display with a resolution of 1280x1024, providing a clear and interactive operator interface. It features a Celeron P4505 processor, 3 GB DDR3 RAM, and a 500 GB SATA hard disk drive, making it suitable for demanding industrial control and visualization tasks. Connectivity options include two Gigabit Ethernet ports, four USB V2.0 ports (with one front-side), and one serial COM1 port. The unit also includes a PROFIBUS/MPI interface (CP 5611-A2-compatible) for seamless integration into Siemens automation environments. System monitoring functions such as watchdog, temperature, and fan monitoring are integrated, alongside an onboard RAID controller for data integrity. It operates on a 110/230 V AC power supply unit with NAMUR compatibility and comes pre-installed with Windows 7 Ultimate 64-bit SP1.

Features

• Integrated 19-inch Touch Display (1280x1024 resolution)
• Celeron P4505 Processor (2C/2T, 1.86 GHz, 2 MB cache)
• 3 GB DDR3 1066 DIMM RAM and 2 MB buffered SRAM
• 500 GB SATA Hard Disk Drive and DVD+-R+-RW drive
• Dual 10/100/1000 Mbit/s Ethernet interfaces
• Four USB V2.0 ports (including one front-side) and one serial (COM1) port
• PROFIBUS/MPI interface (CP 5611-A2-compatible)
• Integrated Watchdog, temperature, and fan monitoring
• Onboard RAID controller
• Two free PCI expansion slots
• Pre-installed Windows 7 Ultimate 64-bit SP1, MUI (de, en, fr, es, it)
• 110/230 V AC power supply unit with NAMUR compatibility

Applications

The Siemens SIMATIC IPC677C Panel PC is suitable for a wide range of industrial automation and control applications, including:

• Machine operation and visualization
• Process control and monitoring
• Data acquisition and logging
• Production line management
• Building automation systems
• Manufacturing execution systems (MES) client stations
• Distributed control system (DCS) operator stations

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. De-energize System: Before beginning any installation, ensure all power to the Panel PC and connected systems is completely de-energized and locked out according to safety procedures.
2. Mounting: Mount the Panel PC securely into a prepared panel cutout. Ensure adequate clearance for ventilation and cable routing at the rear.
3. Power Connection: Connect the 110/230 V AC power supply cable to the designated power input terminal. Verify correct voltage and polarity before applying power.
4. Grounding: Ensure proper grounding of the Panel PC chassis to the industrial ground bus to minimize electrical noise and ensure safety.
5. Interface Connections: Connect Ethernet cables to the RJ45 ports for network communication. Connect USB devices as required. For serial communication, connect to the COM1 port. The PROFIBUS/MPI interface should be connected to the respective fieldbus network.
6. Cable Routing: Route all cables to prevent strain, interference, and damage. Separate signal and power cables where possible.
7. Ventilation: Ensure that the Panel PC's cooling vents are unobstructed to allow for proper airflow and prevent overheating, especially given the integrated fan monitoring.
8. System Configuration: After physical installation, power up the system and configure the operating system and application software as required for the specific industrial process.