Siemens 6ES7647-8AH11-2AA4 SIMATIC IPC277D Nanobox PC

Description

The Siemens 6ES7647-8AH11-2AA4 is a compact and robust SIMATIC IPC277D Nanobox PC designed for control, visualization, and data acquisition tasks in industrial environments. This unit is powered by an Intel Atom E660 (1.3 GHz) processor and is equipped with 2 GB of RAM and a 250 GB SATA HDD for data storage and operating system functions. It operates on a standard 24 V DC industrial power supply and features a basic side-mounting configuration for flexible installation. The pre-installed operating system is Windows XP Professional SP3 MUI. This model provides extensive connectivity through dual Gigabit Ethernet ports, four high-current USB 2.0 ports, a DVI-I graphics output, and an RS485 serial interface.

Features

• Processor: Intel Atom E660 running at 1.3 GHz
• Memory: 2 GB RAM
• Storage: 250 GB SATA Hard Disk Drive (HDD)
• Power Input: 24 V DC
• Ethernet: 2x 10/100/1000 Mbps RJ45 ports
• USB: 4x USB 2.0 (High Current) ports
• Video Output: 1x DVI-I graphics connection
• Serial Communication: 1x RS485 port (COM1)
• Expansion: 1x CompactFlash slot
• Operating System: Windows XP Professional SP3, MUI
• Mounting: Basic side mounting design

Applications

• Human-Machine Interface (HMI) systems
• Data logging and acquisition gateways
• Small-scale process control and monitoring
• Embedded machine control applications
• Industrial communication protocol conversion

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet is de-energized and verified to be at a zero-energy state before installation.
2. 2 Select a mounting location that provides adequate ventilation and clearance around the unit for heat dissipation. Avoid mounting near high-power cables or sources of significant EMI.
3. 3 Securely fasten the IPC to the mounting panel using the integrated side mounting points. Verify the unit is mechanically stable.
4. 4 Connect a low-impedance protective earth (PE) or chassis ground connection to the designated terminal on the IPC.
5. 5 Connect the 24 V DC power supply, ensuring correct polarity. Use appropriately sized conductors for the load.
6. 6 Connect all required communication and peripheral cables, such as Ethernet, USB, DVI-I, and RS485. Ensure proper cable shielding and routing practices are followed.
7. 7 Once all connections are secure, remove LOTO devices and re-energize the cabinet. Power on the IPC and verify correct boot-up and system operation.