Weidmuller 8965500000 ACT20-FEED-IN-PRO-S ACT20 Series Power Feed-In Module

Only 10 item(s) left in stock

Manufacturer: Weidmuller
Product No.: 8965500000
Country of origin:Germany
Product Type: Power Feed-In Modules
Payment: T/T, Western Union
Weight: 1200g
Dimensions: 119.2 mm x 22.5 mm x 113.6 mm
Shipping port: Xiamen
Warranty: 12 months

View full details

Designed to optimize power distribution within modular DIN-rail systems, the Weidmuller 8965500000 ACT20-FEED-IN-PRO-S provides a centralized feed-in point for the ACT20 series and CH20M bus system. This high-efficiency module simplifies cabinet wiring by distributing supply voltage directly to adjacent modules via the rail bus, reducing point-to-point wiring and minimizing installation time.

Key Features

High efficiency rating exceeding 97.9% to minimize thermal dissipation inside the enclosure.
Wide input voltage range of 19.2 V DC to 31.2 V DC for compatibility with standard 24 V DC industrial power supplies.
Integrated screw connection technology ensuring secure, vibration-resistant field wiring.
Supports collective error signaling and status monitoring for enhanced system diagnostics.
Compact 22.5 mm width matching standard ACT20 series form factor to optimize DIN-rail space.

Industrial Applications

Centralized power distribution in industrial automation control panels.
Signal conditioning and isolation racks utilizing the CH20M rail bus system.
Process industries requiring dense, modular DIN-rail instrument configurations.
Power grouping and segment isolation in complex PLC and DCS I/O systems.

Technical Specifications

Parameter	Specification Value
Manufacturer	Weidmuller
Article Number (SKU)	8965500000
Model Designation	ACT20-FEED-IN-PRO-S
Product Type	Power Feed-In Module
Supply Voltage Range	19.2 to 31.2 V DC
Power Consumption	<= 2.0 W
Efficiency	> 97.9%
Connection Type	Screw connection
Protection Degree	IP20
Operating Temperature	-20 to +60 degC
Storage Temperature	-20 to +85 degC
Relative Humidity	0% to 95% (non-condensing)
Dimensions (H x W x D)	119.2 mm x 22.5 mm x 113.6 mm
Net Weight	0.140 kg
Shipping Weight	1.20 kg (including protective packaging)

Connections and Interfaces

Terminal / Port	Functional Assignment
Input + / -	Primary 24 V DC supply input connection
CH20M Bus Interface	Direct power distribution contacts to the DIN-rail bus
Status Relay	Collective error message output (normally closed / normally open contact)

Empirical Engineering Insights

Alternative Models & Compatibility

The ACT20-FEED-IN-PRO-S is fully compatible with all Weidmuller ACT20 series signal converters and isolators that utilize the CH20M DIN-rail bus. It can replace standard passive feed-in terminals when active collective error monitoring and diagnostic feedback are required for the control system.

Application Pitfalls & Engineering Notes

Ensure that the total current drawn by all modules connected to the CH20M bus does not exceed the maximum bus current rating (typically 4 A). If your module configuration exceeds this limit, you must install an additional feed-in module to segment the power distribution groups.

Commissioning & Wiring Tips

When wiring the collective error relay, integrate the contact into your PLC's safety loop or alarm input. This ensures that any power loss or module fault on the CH20M bus is instantly flagged in the control room, reducing troubleshooting downtime.

Installation Guidelines

CRITICAL WARNING

De-energize all primary and auxiliary power sources before mounting, removing, or wiring the module. Ensure the DIN-rail bus contacts are completely clean and properly aligned before snapping the unit onto the rail to prevent physical damage to the contact pins.

Mount the CH20M DIN-rail bus elements onto the TS 35 DIN rail if they are not already installed.

Align the ACT20-FEED-IN-PRO-S with the rail and snap it firmly into place, ensuring the bus connector pins seat correctly.

Connect the 24 V DC input supply lines to the designated screw terminals using the correct wire gauge and torque specifications.

Wire the collective error relay output to your supervisory control system for active diagnostic monitoring.

Key Features:

#Power Feed-In Modules #Weidmuller ACT20 Series

What is the primary function of the ACT20-FEED-IN-PRO-S?

It distributes primary supply voltage directly to the CH20M DIN-rail bus, powering adjacent ACT20 series modules without individual point-to-point wiring.

What is the maximum current capacity supported by this module?

The module supports a maximum continuous current distribution of 4 A to the DIN-rail bus system.

How does the collective error signaling feature operate?

It utilizes an integrated status relay that changes state to trigger an alarm if an error is detected on any connected bus module or if the input voltage drops below the threshold.

Can this module be configured using software?

Yes, configuration and advanced diagnostics are supported via standard FDT/DTM software frameworks.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin

Weidmuller 8965500000 ACT20-FEED-IN-PRO-S ACT20 Series Power Feed-In Module