Bently Nevada 330130-070-00-05 3300 XL Standard Extension Cable

Description

Option 070 (7.0 meters cable length), Option 00 (standard cable without armor), and Option 05 (CSA, ATEX, and IECEx hazardous area approvals) define the exact configuration of this 330130-070-00-05 3300 XL standard extension cable.

Unlike variants configured with Option 01 (armored cable) or Option 02 (with silicone connector protectors), this cable is unarmored to maintain a slim 3.7 mm outside diameter, facilitating routing through tight conduits. It connects an 8 mm proximity probe and a Proximitor sensor to form a complete 3300 XL non-contact eddy-current transducer system.

Features

• Cable length: 7.0 meters (22.9 feet) for matching specific 7.0 m extension requirements in calibrated systems.
• Cable option 00: Standard FEP insulated triaxial cable without protective stainless steel armor.
• Connector design: Miniature gold-plated ClickLoc coaxial connectors (one male, one female) requiring finger-tight torque.
• Environmental rating: Standard FEP jacket operating within broad temperature ranges.
• Agency approval: Certified under option 05 for CSA, ATEX, and IECEx hazardous area installations.

Applications

• Rotating machinery shaft vibration monitoring in petrochemical plants.
• Axial position and thrust measurement on steam or gas turbines.
• Industrial pumps, compressors, and gearboxes.
• Connection between Bently Nevada 3300 XL 8 mm probes and Proximitor sensors.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Ensure the sum of probe length and extension cable length matches the total system length calibrated for the Proximitor Sensor (e.g., a 2.0-meter probe plus this 7.0-meter extension cable equals a 9.0-meter system).
• Do not exceed the recommended finger-tight torque when joining gold-plated 3300 XL ClickLoc connectors.
• Maintain minimum bend radius during installation to prevent damage to the coaxial core and FEP insulation.
• Use conduit or trays to protect the unarmored cable from mechanical cuts, abrasions, or hot surfaces.

Compliance and Certifications

• CSA Class I, Division 1 / 2
• ATEX Zone 0 / Zone 2
• IECEx
• RoHS compliant