Bently Nevada 330730-080-13-00 3300 XL 11 mm Extension Cable

Description

330730-080-13-00 specifies an 8.0 m armored FluidLoc extension cable with an integrated connector protector, used within Bently Nevada 3300 XL 11 mm proximity transducer systems. This configuration prevents fluid migration through the cable's interior and shields the coaxial connectors from environmental humidity, contrasting with unarmored standard cable configurations like option 00.

The cable connects a 3300 XL 11 mm proximity probe to a 330780 Proximitor Sensor to complete the non-contact eddy-current displacement measurement loop. The gold-plated brass ClickLoc connectors lock securely to maintain electrical continuity, while the integrated FEP-coated armor provides mechanical protection against abrasion and physical impacts in harsh rotating machinery environments.

Features

• Cable Length Option 080: 8.0 meters (26.2 feet) of FEP insulated coaxial cable.
• Cable Type Option 13: Armored FluidLoc coaxial construction with integrated ClickLoc connector protector.
• Armor Construction: FEP-coated stainless steel armor providing robust mechanical shielding against physical damage and wear.
• FluidLoc Core Sealing: Blocks oil and process liquids from traveling through the cable interior in high-pressure or fluid-exposed casings.
• Gold-Plated Brass Connectors: Proprietary ClickLoc connections ensure a tight and reliable lock that resists vibration.
• Connector Protector: Shields the critical connection point against harsh chemicals, humidity, and atmospheric contamination.
• Approval Option 00: Standard configuration for installations that do not require hazardous area certifications.

Applications

• Axial position and vibration monitoring on industrial steam turbines and compressors.
• Differential expansion and shaft position tracking in harsh rotating machinery setups.
• Environments requiring robust shielding against turbine oil, moisture, and high temperatures.
• Industrial installations needing FEP armor to defend the coaxial cable from abrasive impacts.

Ordering Information

Technical Specifications

Installation Guidelines

• Always observe minimum bend radius recommendations to prevent physical stress on the internal coaxial cores.
• Fully snap the gold-plated miniature ClickLoc connectors together to verify a complete and secure coupling.
• Position the connector protector over the mated probe-to-extension cable joint to block ingress of oil or water.
• Verify that the total length of the extension cable combined with the probe length matches the calibration length of the Proximitor Sensor.
• Do not route transducer cables parallel to high-voltage lines or AC electrical power lines to avoid signal interference.

Compliance and Certifications

• FCC: Complies with Part 15 of FCC rules for industrial devices.
• EMC: European Community Directive 2014/30/EU, referencing standards EN 61000-6-2 and EN 61000-6-4.
• RoHS: European Community Directive 2011/65/EU.