Manufacturer: Lenze
Product No.: E84AVSCE1134SX0
Country of origin:Đức
Product Type: Variable Frequency Drives
Barcode: 85044095
Payment: T/T, Western Union
Weight: 6000g
Dimensions: 350 x 135 x 250 mm
Shipping port: Xiamen
Warranty: 12 months
Designed to optimize motor control efficiency in complex industrial systems, the Lenze E84AVSCE1134SX0 variable frequency drive provides precise speed and torque regulation for three-phase asynchronous motors. This 8400 Series inverter module features integrated interference suppression measures to ensure electromagnetic compatibility and stable operation within crowded electrical cabinets. Engineered for direct panel mounting, the unit combines a compact footprint with robust thermal management to maintain high performance under continuous heavy-duty industrial loads.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Code | E84AVSCE1134SX0 |
| Product Series | 8400 StateLine |
| Rated Power Output | 11.0 kW |
| Mains Connection Voltage | 3 AC 400 V / 500 V |
| Mains Frequency Range | 45 to 65 Hz |
| Enclosure Protection Rating | IP20 |
| Permissible Operating Temperature | 0 to +55 degC (with derating above +45 degC) |
| Product Dimensions (H x W x D) | 350 x 135 x 250 mm |
| Net Product Weight | 6.00 kg |
| Commodity Code | 85044095 |
| Terminal / Port | Functional Assignment |
|---|---|
| L1, L2, L3 | 3-Phase Mains AC Power Input Connection |
| U, V, W | Controlled AC Output to Motor Stator |
| +UG, -UG | DC Bus Terminals (for shared DC bus or braking unit connection) |
| Control Terminals | Analog Inputs/Outputs, Digital Inputs/Outputs, and Relay Contacts |
The E84AVSCE1134SX0 belongs to the 8400 StateLine family. When replacing older 8200 vector series drives or alternative 8400 variants (such as BaseLine or HighLine), verify that the control terminal configuration matches. Parameter sets can be migrated using the Lenze L-force Engineer software, but firmware revision differences (e.g., V1.x to V2.x) may require manual adjustment of specific register mappings.
The IP20 open-chassis design relies heavily on convection cooling. When mounting multiple units side-by-side in a single enclosure, ensure a minimum vertical clearance of 100 mm above and below the drive. Operating the unit continuously at 11 kW near its upper thermal limit of +55 degC requires external cabinet ventilation or active air conditioning to prevent overtemperature faults.
Always use low-capacitance, shielded motor cables. The shield must be grounded over a large surface area using the integrated EMC shield plate on the drive housing. To prevent high-frequency common-mode currents from interfering with sensitive analog control loops, ensure the control cables are routed separately from the high-voltage motor and mains power lines.
CRITICAL WARNING
DANGER: Hazardous electrical charge remains stored in the internal DC-bus capacitors after the mains supply is disconnected. Wait at least 10 minutes after complete physical de-energization and verify that the voltage between the +UG and -UG terminals is below 50 VDC before initiating any installation, wiring, or maintenance procedures.
Mount the drive vertically on a flat, vibration-free backplate inside an IP54 or higher rated control cabinet, ensuring the cooling fins are unobstructed.
Connect the protective earth (PE) conductor to the designated grounding terminal block prior to making any other electrical connections.
Wire the 3-phase mains input power to terminals L1, L2, and L3, and wire the motor output lines to terminals U, V, and W using specified torque values.
Connect the control and safety (STO) wiring, ensuring proper shielding and separation from power cabling before applying power for commissioning.
Vận chuyển nhanh toàn cầu
Trả hàng & Bảo hành
Đơn hàng được xử lý và giao từ thứ Hai đến thứ Sáu (không bao gồm ngày lễ).
Để biết đầy đủ điều kiện, phí lưu kho và chi tiết trả hàng quốc tế, vui lòng xem trang chính thức của chúng tôi Chính sách Hoàn tiền & Trả hàng .
| Color pattern |
Trắng xám
|
| Country of origin |
Đức
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
